MINIMOTO Far
Very cheap quality. Inside tab that holds the lens in place broke. Not even. 100 kilometers on the thing. If minimoto sees this. I would like a replacement
 |  |  |
Following the coloring image of the first model * "Monkey Z 50 M" released in 1967, adopted a dedicated three-dimensional emblem and a main key suitable for a memorial model.Fuel tank side and side covers are colored with pearl sunbeam white which is the main color, and fenders of the front and rear are colored as shasta white. In addition to the frame, front fork, swing arm, etc., the headlight case and the stripe on the top of the fuel tank are made Magna Red, and the seat adopts a fashionable check pattern seat imitating the original model. Also in commemoration of the 50th anniversary of release, a wing mark badge of reprinted design is arranged on the side of the fuel tank, a memorial sticker is arranged on the top, a 50th anniversary emblem on the side cover, a 50th anniversary logo on the back of the seat , The 50th anniversary mark is given to the main key, and it is a model that satisfies the feeling of possession full of special feeling. * Domestic mass production Commercial vehicle
| deplasman | 49 | Motor tipi | AB28E/Air-cooled/4-stroke/OHC/Single Cylinder |
| Maksimum Çıkış (ps) | 3.4PS/8,500rpm | Maksimum tork (kgf / m) | 0.35kgf・m/5,000rpm |
| Araç Ağırlığı (Kuru Ağırlığı) | - | Yakıt Tankı Kapasitesi litre | 4.3 |
GM-MOTO Arka Kepçe Bar Tipi / B Tutucu Bar Gövde T...
It's only useful for lifting Rear.If there is a BALI or Seat Bracket, you may need to cut it.
NTB Lastiği Değiştir
Get it as a spareI haven't put it on yet, so I'm not sure how comfortable it is.I'm sure it'll work.
KITACO Paslanmaz Debriyaj Kablosu (Standart Tutucu...
Large satisfied with the very good finish and feel of operation.
KITACO Tappet Ayar Anahtarı
Useful tool, works with 8mm and 9mm adjustment nuts, and 2 types of adjustment screws.It is a handy tool and works with 8mm and 9mm Adjustment Nut and two types of Adjustment Screw.
TANAKA TRADING Kaplama Arka Çamurluk
It's made of plastic, so I thought it would be about the same.It is easy to drill holes.
HONDA Gösterge lambası
I don't know what speed the GEAR of the first CROSS CUB is in, so Quantity:2pc. I bought a Set and use it to identify the first speed and Top. Because a special product is expensive.I'm not sure, but I also installed the Coupler It was easy to take it apart and plug it straight into the place where ...
SP TAKEGAWA (Special Parts TAKEGAWA) Hidrolik Debr...
I bought this because I wanted to try to hydraulicize the Clutch.The installation was done Smoothly.The NORMAL ClutchStopper Pin position seems to be a hassle.I'm looking forward to seeing it when it's finished as I'm only installing it.
KITACO Tahrik Dişlisi (Ön)
420 SizeDownConversion from 428 Size of NORMAL to 420 SizeDownConversion using Seal chain. 16T was selected for 125cc Bore up and Rear was 36T.
(4.0)
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING