- Uyumlar:
- HONDA dachshund Vehicles with 4 hubs
- HONDA Shirley 50. Vehicles with 4 hubs
- HONDA Dax 70 Vehicles with 4 hubs
- HONDA Shirley 70 Vehicles with 4 hubs
These are a great upgrade to the stock chaly or dax wheels and being wide than stock give a more aggreive look to the bike they are being fitted to.Daha fazla oku - Uyumlar:
- HONDA
- HONDA
After buying Kitaco, G-Craft and Takegawa rims, this Tanaka Trading rim was not good. The picture shows it highly polished but it is not at all. In fact it is nothing but rough scratches all over it, ...Daha fazla oku - Uyumlar:
- HONDA
- HONDA
- HONDA XR100 Motard XR100 motard aluminum wheels (rear)
- HONDA dachshund Dax drum hub front and rear
- HONDA
- ...ve dahası.
About quality and texture NTN always has the quality to trust and buy
About the feeling of use It's not used yet. I had to buy two, but I only bought one
Products to buy together rubber hammer
Dif...Daha fazla oku - Uyumlar:
- HONDA
- HONDA
I was prepared for this because the Gold amount is extremely low compared to JAPAN.The Rim is not shiny and there is BALI around the Wheel, just as I expected.BALI was lightly polished with Paper and ...Daha fazla oku - Uyumlar:
- HONDA
- HONDA
3.5jThe Center of the Large body comes out both front and rear by pontooning, but there is some flex when you rotate it.That's the Chinese, BALI is terrible.Daha fazla oku - Uyumlar:
- HONDA
- HONDA
I used it on my '88 GORILLA.I changed to Aluminum Cast Wheel, so I installed it to Center out.Because the material is not aluminum, I think that it is a little heavy, but I use it in Touring, etc. If ...Daha fazla oku - Front Axle ShaftTarafından TANAKA TRADINGUyumlar:
- HONDA
- HONDA
I used it for my first MONKEY assembly, I don't know the OEM and I'm happy with the texture.Daha fazla oku - Rear Axle ShaftTarafından TANAKA TRADINGUyumlar:
- HONDA
- HONDA
I was worried because the price was too cheap, but I can use it normally.Well, I don't want it to be useless.So far, there are no problems.Daha fazla oku - Uyumlar:
- HONDA
- HONDA
I put it on my Z50J-13 with no problem.Tire, Minimoto Tube and Quantity:Set, 350-8Iron Wheel, because Rust will stick with Tire.I'm hoping that's not the case with the Aluminum Wheel.Daha fazla oku - Uyumlar:
- HONDA
- HONDA
I used this part for the maintenance of my 30 year old GORILLA, I bought this part to reinforce the hub area because I changed the wheel to aluminum. The installation is no problem and I think the str...Daha fazla oku - Uyumlar:
- HONDA
- HONDA
I used it for the maintenance of my 30 year old GORILLA, because the wheel of NORMAL was with holes due to rust, I changed it to this wheel of the same size as NORMAL. 。 The exchange itself should be ...Daha fazla oku - Uyumlar:
- HONDA dachshund Vehicles with 4 hubs
- HONDA Shirley 50. Vehicles with 4 hubs
- HONDA Dax 70 Vehicles with 4 hubs
- HONDA Shirley 70 Vehicles with 4 hubs
I wanted to get a matching wheel other than Silver.It's like a semi-gloss black.Just because it's Chinese didn't mean that the holes in the Bolt didn't fit, lol.Daha fazla oku - Uyumlar:
- HONDA dachshund Vehicles with 4 hubs
- HONDA Shirley 50. Vehicles with 4 hubs
- HONDA Dax 70 Vehicles with 4 hubs
- HONDA Shirley 70 Vehicles with 4 hubs
This is used for the DAX during Restore.Black is semi-glossy.It's not Black Anodized because the price is so low.I think common sense would tell you that.Daha fazla oku - Uyumlar:
- HONDA dachshund Vehicles with 4 hubs
- HONDA Shirley 70 Vehicles with 4 hubs
- HONDA Dax 70 Vehicles with 4 hubs
- HONDA Shirley 50. Vehicles with 4 hubs
This is used for the DAX during Restore.Black is semi-glossy.It's not Black Anodized because the price is so low.I think common sense would tell you that.Daha fazla oku - Uyumlar:
- HONDA dachshund Vehicles with 4 hubs
- HONDA Shirley 50. Vehicles with 4 hubs
- HONDA Dax 70 Vehicles with 4 hubs
- HONDA Shirley 70 Vehicles with 4 hubs
Bought to replace factory wheels, finish is a bright anodised silver, no scratches or obvious imperfections.
The holes line up nicely and require no filing or changes to fit, came with new M6 screws ...Daha fazla oku - On the purchase page, there is no indication of tire size or anything else, so, yeah! I bought them at the outer circumference of 90/65-8 for Front and 130/50-8 for Rear It's too smallFront replaced w...Daha fazla oku
- Rear Axle ShaftTarafından TANAKA TRADINGUyumlar:
- HONDA
- HONDA
Because Bolt part head processing has not been cleaned up, it is hard to use as a custom part.I am satisfied because I used it with NORMALRepair this time, but I think if it was a purchase under the C...Daha fazla oku - Uyumlar:
- HONDA
Part worked as specified and looks great! Part is very well made and fits the wheels I already have! Will have to machine to fit the hub I want.Daha fazla oku - Uyumlar:
- HONDA
- HONDA
After installation, the car body feels very light, I think that the Foot work improved. ReplaceAlthough it was steel, it was rust, but this time, because it is Aluminum, maybe Large durableI think.Daha fazla oku - Tire and Wheel of OEM purchased this product of Tire and Wheel set because it was rash with rust.I arrived in a state of being assembled, so I was able to install it immediately.I am satisfied with th...Daha fazla oku
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING