Bu HandArm ile Bu HandArm Rotili çektirme aleti, Ayar cıvatasını sıkarken, hareket etmeyecek şekilde sabitlenebilmesi için Handjrm'i kavrar, bu nedenle Tork kolayca takılabilir ve belirli bir açıda çıkarılabilir.
Ayrıca, Gidonu tutarsanız, Çektirmenin, çıkarıldığında şok tarafından üflenmesini önlemek güvenli olacaktır.
SuspensionAArm'ın Rot kolu veya Bilyalı eklemi ile güvenle kaldırabilirsiniz.
LargeSmall İki tip Çektirme hazırladık, bu yüzden lütfen işinizin içeriğine göre seçin.
Büyük bir kişi ucun tırnağından gidonun toplam uzunluğuna 28 cm ve uçlu top eklemi yapan çivi açıklığı 2 cm'dir.
Küçük kişi toplam uzunluğu 26 cm ve çivi açılmasında 1.7 cm'dir.
Güvenli bir şekilde çıkarılabilir.
LargeSmall İki tip Çektirme hazırladık, bu yüzden lütfen işinizin içeriğine göre seçin.
Büyük bir kişi ucun tırnağından gidonun toplam uzunluğuna 28 cm ve uçlu top eklemi yapan çivi açıklığı 2 cm'dir.
Küçük kişi toplam uzunluğu 26 cm ve çivi açılmasında 1.7 cm'dir.
This ball joint puller with hand arm allows you to grip the hand arm when tightening the adjusting bolt so that it does not move, making it easy to apply torque and to remove it at a secure angle.
Also, if you hold the handle, you can prevent the puller from being blown away by the impact when it comes off.
It can be safely removed either from the tie rod ends or the ball joints of the suspension A-arms.
We offer two types of pullers, large and small, so you can choose the one that best suits your work.
The larger one has a total length of 28cm from the tip jaw to the handle and a 2cm opening for the jaw that clamps the ball joint at the tip.
The smaller one has a total length of 26cm and a claw opening of 1.7cm.
Safe to remove.
We offer two types of pullers, large and small, so you can choose the one that best suits your work.
The larger one has a total length of 28cm from the tip jaw to the handle and a 2cm opening for the jaw that clamps the ball joint at the tip.
The smaller one has a total length of 26cm and a claw opening of 1.7cm.