The main pipe is made from the same lightweight, high-rigidity 7N01 material as the popular triple square swingarm.
By fixing the rearset directly to the frame, the rigidity of the step area is improved.
The joint between the main pipe and the pivot plate is made by knock pin processing on the threaded part, so that the bolts do not take the load in the shear direction to achieve high strength.
Since the engine itself can be offset by 7mm, the offset sprocket that is required when installing 10-inch 4.0J wheels and NSR wheels is not necessary.
■Option Description
[Finish: Buff finish (standard) / Ceracoat]
Please select the surface finish of the frame, either buffed (standard) or Cerakote.
*What is Cerakote?
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.
Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3-5 weeks on top of normal delivery time.
[Option 1: Pivot sectionΦ12 specification (+3000yen)]
An option to make the pivot shaft part of the frame Φ12.
*The swingarm side also needs to have the pivot part set to Φ12.
[Option 2: Press-fit bearing race (+2000yen)]
Bearing race is optional for GC-020 aluminum frame.
*Normally not press-fit.
[Option 3: Oil cooler bracket modification (+5000yen) / Down tube bracket modification (+3000yen)]
・Installation of oil cooler bracket
Modify the oil cooler so that it can be installed
*Cannot be machined at the same time as down tube mounting bracket machining
*Separate G Craft part number:
39965, 39948, 39966, 39949 oil cooler brackets are required
・Down tube attachment bracket modification
G-Craft Part Number:
39921 This is the process of welding the brackets to attach the down tube.
*It can not be processed at the same time as oil cooler installation bracket processing