Ön çatal "2 parça" veya "tip 1" arasından seçilebilir.
Üst köprü ve direksiyon mili 40 mm veya 60 mm ofset arasından seçilebilir.
Fren tipi, orijinal kampanalı fren spesifikasyonu ve disk fren spesifikasyonundan seçilebilir.
Ayrıca, gümüş ve siyahtan 40 mm ofset seçilebilir.
İki tür direksiyon kolu vardır : MONKEY hakiki saplı kelepçeyi / tutacağı ve çubuk tutamacını kullanan türü kullanır.
■ 2 adet ön çatal
Dış boru ve aks alanı için 2 adet montaj yapısı benimser.
Yüksek yoğunluklu alüminyum malzemenin tüm yüzeyini işleyerek, dış boru yüksek hassasiyetli daire içinde üretilir ve ayrıca, yüksek sertlik ve ağırlık azaltma elde edilir.
■ 1 açık çatal yazın
Tip 1 ön çatal, daha büyük modellerde olduğu gibi serbest bırakma kuvveti mekanizmasını değiştirerek sönümleme kuvvet mekanizmasını değiştirerek stabilitesini arttırdı ve geri tepme sırasında şok miktarını azalttı. DU metalinin kullanımıyla, işleyişini büyük ölçüde geliştirmiştir.
■ Üst köprü ve direksiyon köprüsü
İşlenmiş anodize alüminyum ile duralumdan yapılmıştır.
Sırt hafifliği sağlamak için kalınlığı azaltılmıştır.
Direksiyon kilidi braketi takılı.
Mil merkezinden 40 mm ofset veya 60 mm ofset arasından seçim yapabilir.
60 mm ofset, büyük miktarda egzoz için tekerlek tabanı olabilir.
Gümüş ve siyah 40 mm ofset için ve sadece 60 mm ofset için gümüş.
■ MONKEY için iki tip : gerçek katlama tutacağı ve çubuk tutacağı için.
Sadece GORILLA ve diğerleri için bar kolu tipi.
Orijinal katlama sapı için, orijinal stili tercih eden müşteriler için gerçek katlama sapı / tutacak tutucusu takmak için üst köprüye sahiptir.
MONKEY / GORILLA için çubuk sapı tipinde, hakiki katlama sapını çıkarın ve MONKEY için opsiyonel sap borusunu takın. Orijinal sap GORILLA için kullanılabilir.
■ Davul fren spesifikasyonu : Fren paneli için varil bitirme döküm alüminyum ve fren paneli için buff bitirme dövme alüminyum benimser.
■ İsteğe bağlı parçalar : light27 dik çatal 09-03-007 için kafa ışık kalmak, Φ27 dik çatal 05-08-0002 için sinyal kalmak
MONKEY, tutamak tipinde veya GORILLA ve BAJA için orijinal sap kullanılmadan yapılırken, tutamak borusunu ayrı olarak satın almanız gerekir..
10 inçlik tekerlek için parça seçerken (SP TAKEGAWA 12 inçlik tekerlek) , SP TAKEGAWA alüminyum jant değiştirmelisiniz.
* 8 inç ve 10 inç, 3.5J genişliğindeki tekerleği kuramaz.
■Type1 Front Fork for 10inch
Reinforced upright front forks suitable for high power engine parts.
The Type 1 front fork uses the same free valve type damping force generation mechanism as the larger models to improve stability and reduce shock on rebound.The use of DU metal greatly improves the operability and the structure has high potential for racing use.
For 10" Φ27 upright front forks (type 1)
Fork A Length: 539mm, Outer tube B: 256mm
Fork oil quantity: 75cc, Fork Oil Viscosity: 40mm 2/S
Kit for Monkey Gorilla Bar Handle
In case of Monkey, you need to remove the normal folding handle and purchase the handle pipe separately.Gorilla can be installed with stock handlebars.
The stock front fender can be installed.
■Details of each part
Top bridge/steering stem
Duralumin machined with anodized finish.
The back side is lightly punched.
With steering lock bracket.
Fork pitch: 174mm
Wheel Mounting Width: 149mm
drum brake specification
Drum brake panel and brake arm are original parts
For the drum brake specification, the stock drum brake hub and brake shoes are used without modification, and the brake panel and brake arm are original parts.
The brake panel is finished with cast aluminum barrel and the brake arm is finished with forged aluminum buffing.
■Parts purchased separately
Headlight bracket for Φ27 upright fork (09-03-007)
Φ27Blinker bracket for upright fork (05-08-0002)
This blinker bracket can be used for both OEM blinkers and SP Takegawa's custom blinkers.
It is necessary to change to SP Takegawa 10 inches wheels or SP Takegawa 12 inch wheels.
SP Takegawa Front Fender must be purchased separately.
For drum brakes, a 6mm spacer (sold separately) is required to center the front wheel.
6mm spacer (06-09-1302)
■To get the wheel center (10 inches wheel use condition)
■About the installation of SP Takegawa's 12-inch wheels
The Φ27 upright front fork kit for 10 inches wheels is also compatible with SP Takegawa's 12-inch wheels.
However, the tires to be used are limited to the MAXXIS 12-inch flat tires sold at SP Takegawa.
When other tire sizes are installed, they may interfere with the outer tube of the front fork.Also, SP Takegawa front fender may interfere with the tire and may not be able to be installed.
How to get the wheel center (under the condition of using 12 inches wheel)