GC - 019, GC - 020 Salıncak Kolu için Alüminyum Çerçeve Geniş Genişlik Salıncak Kolu, MONKEYWide salıncak koluyla aynı genişliğe sahiptir. (Genişlik 187-190mm) Swing Arm ile yapıldı.
MONKEYOEM hub'ı olduğu gibi kullanabilirsiniz, 39048 WideRear disk hub'ını kullanabilirsiniz.
Salıncak Kolu, Davul ve disk ile uyumludur.
Güçlü "Göz şeklinde kesit." Üçlü Kare Boruların Salıncak Kolu, Kullanıcıya desteğinin% 80'inden fazlasını 16 cm veya daha fazla olan bir Boru.
8-4.0J takarken, Ön ve Arka Dişli Ara Çubuğu 4mm için 4mmOffset dişli gereklidir.
10-4.0'ı yüklerken, Motor tarafında dengeleyebilirsiniz, böylece bir Ön dişliye ihtiyacınız yoktur (Normal hub kullanıldığında OffsetSprocket spacer 8 mm gereklidir)
■ Seçenek Açıklaması
[Salıncak kol bitirmek]
・ Siyah Eloksal Kaplama (GCraft parça numarası) : 60198) Tasu25000 yen
・ SeraCoat kaplama (GCraft parça numarası) : 60807) Tasu30000 yen
[SeraCoat nedir?]
SeraCoat, ABD askeri ekibi, özel pişirme boyası ve soğuk boya alanında kullanılan NIC tarafından yapılan bir boyadır.
Sert şartlarla baş edebilmek için denetlenir ve ısı direnci, aşınma direnci, dayanıklılık, solvent direnci, ısı yayılımı, ısı yalıtımı vb. Gibi performans vurgusu için üretilen ve üretilen bir boyadır.
Seramik, özel bir makine ile toz haline getirilir ve kaplama filminin mukavemetini arttırmak için boyaya karıştırılır. 。 Bu nedenle, saten benzeri bir yüzey haline gelir, ancak kaplama çok ince yapılabilir (25Micron)
Kaynak işaretleri (Boncuk) Saklanmadan da bırakmak mümkündür.
Yapışkan malzemeler arasında yapışkanlık en yüksek değerdir, Kırışıklık katlanamayan bir şekilde bile şekillendirilemez, boya kolayca basamaklardan sıyrılarak çıkarılabilir, bu nedenle Çerçeve, Swing Arm yüzey işleme için uygundur.
* Normal teslimat tarihi + 3-5 hafta.
[Seçenek : Zincir kaydırıcısıSpec.]
Zincir kaymakBolt stop Spec. (GCraftProductNo : 60228) +1000 yen
Perçin Durdurucusundan Bolt Stop'a Zinciri kaydırıcıyı değiştirin 。 Yıpranmış olduğunda kolayca değiştirilebilir.
[Seçenek : Stand HookBase ekleme işlemi]
Kanca Standı (M6) Ek işlem (GCraftProductNo) : 60903) +3000 yen
GCraft Stand Hook'u yaptı veya şirket dışında Stand Hook yaptı (M6) Yükleyebilirsiniz.
[Seçenek : Pivot parçası (Φ12) Spek.]
Salıncak kolu pivot kısmı Φ12Spec. (GCraft parça numarası : 60898)
Salıncak kolu Bu, pivot parçasını Φ12'ye ayarlamak için bir seçenektir. 。 Çerçeve tarafı da needs12'ye ihtiyaç duyar.
Somun cinsi ile Atanmış Şaft.
[Seçenek : Zincir çekerek spec.]
Zincir çekerek seçeneği
・ HookSpec Yarış Pisti. (GCraft parça numarası : 60186) +3000 yen
Konvansiyonel Zincirli çizim arkaya Stand HookSpec değiştireceğiz. 。 GCraft parça numarası : 32071 ・ 32072 ・ 32073 Yarış Standı Kanca takılabilir.
* GCraft parça numarası : 33170APLockheed kaliperSupport monte edilemez (Ve girişim)
・ Çekme tipinin arkasında (GCraft parça numarası) : 60221) +3000 yen
Ayarlamada bakımın zahmetli bakımını ortadan kaldırmak için tasarlanan bir arka plan Ayarlayıcısıdır.
Ayar somunu Swingarm'ın en Arkaına gelir, bu nedenle takım müdahalesi vb. Nedeniyle dönmesi zor olan Ayar bölümünü ayarlamak kolaydır.
* Racing Stand HookSpec., OWType aynı anda yüklenemez
・ OWType (GCraft parça numarası) : 60014) +3000 yen
Zincir çekme parçasını Taper ile işleyerek, Aks Şaftının üst ve alt aralıklarını eledik.
İşlenmiş Parça hareket ettiğinden, üst ve alt boşluk yoktur 。 Büyük bisikletin Salıncak Kolu tarafından da benimsenen bir mekanizmadır.
・ OWType Yarış KancasıSpec Standı. (GCraft parça numarası : 60188) +5000 yen
OWTypeChain çıkarma arka için Stand HookSpec değiştirin.
GCraft parça numarası : 32071 ・ 32072 ・ 32073 Yarış Standı Kanca takılabilir.
* GCraft parça numarası : 33170APLockheed kaliperSupport monte edilemez (Ve girişim)
・ Eksantrik tip (GCraft parça numarası) : 60059) +5000 yen
Kawasaki Motosiklet'te yaygın olarak bulunan Eksantrik formülün bir Zincir çıkarmasıdır.
* DiskSpec için kullanıldığında, yalnızca Kumpas tipi Kaliper desteğini Swing Arm'ın alt kısmında kullanabilirsiniz.
* Geniş WheelSwing Kolu için sadece discSpec ile kullanılabilir.
The wide width swingarm for GC-019 and GC-020 aluminum frame is the same width (187-190mm wide) as the monkey wide swingarm.
The 39048 wide rear disc hub can be used with this kit.
This swingarm is compatible with both drum and disc.
The triple square pipe swingarm has a strong "figure of the eye" cross-section and is popular with over 80% of users who choose a 16cm or longer pipe.
When installing 8-4.0J, 4mm offset sprocket is required for front and 4mm sprocket spacer is required for rear.
When installing the 10-4.0, the front sprocket is not necessary because it can be offset on the engine side (Offset sprocket spacer 8mm is necessary when using the stock hub)
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Options: Chain Slider Specifications]
Chain slider bolt fixing specification (G-Craft part number: 60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Options: Additional processing of stand hook base]
Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Options: Pivot section (Φ12) specification]
Swingarm pivot part Φ12 specification (G craft part number)60898)
It is an option to make the swingarm pivot part Φ12.The frame side also needs to be Φ12.
Special shaft and nut included.
[Options: Chain pull specification]
Chain pull option
・Racing stand hook specification (G-Craft part number: 60186)
The rear part of the conventional chain pull can be used as a stand-hook.G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Back pull type (G-Craft part number: 60221)
This backward pull adjuster is designed to eliminate the hassle of adjusting the chain.
Since the adjusting nut is located at the end of the swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference of tools
*Can not be installed on the racing stand hook specification and OW type at the same time
・OW type (G-Craft part number: 60014)
The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
・OW type racing stand hook specification (G-Craft part number: 60188)
The rear part of OW type chain pull is changed to stand hook specification.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Eccentric type (G-Craft part number: 60059)
This is an eccentric type chain puller commonly found on Kawasaki motorcycles.
*Only caliper supports with calipers attached to the lower part of the swingarm can be used on disc models.
*Swingarm for wide wheel can be used only with disc specification.