Bir önceki modelin sağlam bozulmasının ve sağlamlığının korunmasını sağlarken, "kurulumun hızlanmasını" amaçlayan nihai bir yarış modeli.
Yüksek gaz kelebeği kiti için büyük bir küçük değişiklik!
Detayların detaylarını inceler ve sürtünmeyi azaltır.
Detayların detaylarını inceler ve sürtünmeyi azaltır. Neredeyse tüm gidonun üstesinden gelebilecek 1400 mm uzunluğunda evrensel kablo ile donatılmıştır.
• EVO2'nin Özellikleri
120mm tutuş benimser.
Genel uzunluk kavramasını benimser (120 mm) tutucu tasarımı gözden geçirerek
Bu bir beş köşeli parantez.
Braket ile iç boru arasındaki eklem kısmı, yük dağılımında mükemmel olan beşgen kullanır.
20,9 mm'lik ince bir tutucudır.
Rijiditeyi korurken atıkları kaydeden 20,9 mm'lik ince bir tutucudır.. Kavrama ucuna toplam genişlik 142.05 mm ulaşır.
Daha fazla kilo kaybı için alüminyum kesimdir.
EVO'nun bilgi birikimine dayanarak, bakımdan ödün vermeden kompaktlık ve hafiflik sağlar.
• EVO'dan miras alır.
Desteğin sürtünme direncini azaltır.
Tel durdurucunun sadece bir tarafta geçirildiği oluklara sahiptir ve stoper tıkanıklığının oluşumunu azaltır.
Tel Slayt Sabit Tip
Gaz kelebeği telini bir stoper ile tutmak için bir mekanizmadır ve stoperi takmak ve çıkarmak ve gaz telini kolayca ayarlamak kolaydır.
2 parçalı yapının iç borusu.
Tutamağı çıkarmadan dirseği değiştirmek mümkündür.
Durum ve sahnelere göre seçim yapmak mümkündür.
Sürtünme "yuva yaşlanma sürecini" azaltır.
Telin yüzeyindeki düzensizlikleri, işlemeyi hızlandırarak sınırlara indirir ve sürtünme direncini azaltır.
Aynı zamanda paslanmaya dayanıklı bir Paslanmaz Çelik kullanır.
• Kendi sürekliliğine sahiptir.
This is the ultimate racing model that has been designed to "speed up installation" while maintaining the ease of disassembly and maintenance of the previous model.
Big minor changes to the High Throttle Kit!
All friction is reduced by reviewing the shape of the details
The kit incluides universal wire with a maximum length of 1400 mm, compatible with almost all handlebars.
■Features of EVO2
By reviewing the design of the holder, a grip with a general length (120mm) is adopted
・Pentagonal bracket
The joint between the bracket and the inner pipe is pentagonal, which is excellent in distributing the load.
・20.9mm thin holder
The 20.9mm thin holder, which maintains rigidity and eliminates waste, achieves an overall width of 142.05mm up to the grip edge.
・Machined aluminum for further weight reduction
Based on the know-how of EVO, the compact size and lightest weight are realized without sacrificing maintainability.
■Inherited from EVO
・Reduction on friction resistance of bracket
The groove for the wire ties is only on one side to reduce the occurrence of rattling of the barrel.
・Wire slide fixed type
The throttle wire is held in place by a stopper, making it easy to attach / detach the barrel and adjust the throttle wire.
・Inner pipe with two-piece structure
Bracket can be replaced without removing the grip.
You can choose according to the condition and scene.
・"Nest aging process" to reduce friction
By the swaging process, the unevenness of the surface of the wire is reduced to the utmost limit and the frictional resistance is reduced.
In addition, rust-resistant stainless steel is applied.
■Unique Maintainability