Güneş ışığının yoğunluğuna bağlı olarak Lens'in yoğunluğunu değiştiren Light Sensitive fonksiyonu ile ShieldLens.
İç ve dış arasındaki Kask Seviyeleri hava sıcaklığı farkını yapıştırarak lamine bir yapı oluşturmak ve kalkan boyunca bulutlu görünmesini engeller.
Daha fazla Anti-Sis işlendi.
Touring'den Race sahnesine Amatörden En iyi sürücüye Lütfen çok fazla güven alan en güçlü Lens'i deneyimleyin.
Kolay kurulum sadece kalkanın arkasına yapıştırın.
[PROGRIP 3000LS LENS talimat açıklaması]
Bu yenilikçi Lens, Kalkan'ın performansını, çeşitli Sis ve Kalkan koşullarına sahip olduktan sonra farklı sis ve güneş koşullarına sahip Koşullarda Toplam olarak geliştirir.
3000 LS'yi Shield'e takmadan önce lütfen aşağıdaki talimatları dikkatli bir şekilde okuyun.
■ Hazırlık
Serin, kuru ve tozdan arındırılmış bir yer seçin.
Kask'ın Kalkanı indirildiğinde, lütfen maskeleme bandını kalkanın açıklığı boyunca yapıştırın. (Paketin şemasına bakın).
Kalkanı çıkardığınızda, 3000 LSLens'in tam kurulum yerini işaretleyecektir.
Kalkanı Kasktan çıkarın.
Üretici talimatlarını izleyin, lütfen Kalkanı temizleyin ve kurumaya bırakın.
Kalkan üzerinde parmak izleri, yağ lekeleri, su damlaları olup olmadığını kontrol edin.
Silikon yüzey işlemine maruz kalan 3000 LS'nin Kalkan Temizliğine yapışmasını arttırmak için, (Silikat içermeyen) Petrol bazlı plastik için temizlik maddesini öneririz.
Kalkanın Temizlenmesi? Kuruduktan sonra 3000 LSLens takın.
Montaj
1. Her iki Lens'ten Koruma filmini çıkarın.
Bu durumda, Lens'e parmak izi veya kir takmamaya dikkat edin.
Hem SIDE lens? Koruyucu filmi, etrafındaki yapışkan Contadan çıkarın.
2. Lensin her iki ucunu da tutun ve Lensi, Çift Taraflı Bantlı tarafın, Korumanın içine bakacak şekilde, U şeklinde yavaşça eğin.. (Paketin şemasına bakın)
3. Lensi bir kez yapıştırdıktan sonra, tam olarak yere koyun. Miktar: Lensin tamamına ayarlandığından ve hafifçe uygulandığından emin olun.
Yapıştırma konumu değiştiğinde, kaydırılan yeri hafifçe kaldırın ve yavaşça tekrar güç ekleyin.
4. Tam olarak objektif Miktar: Ayarlandıktan sonra, bu süre Lens etrafına sıkıca kuvvet uygular ve yapıştırıcıyı sıkıca yapıştırın.
Lensi Kalkan'a sıkıca yapıştırmak için Kalkan'ı Kaska'ya tekrar takmadan önce 24 saat bekleyin.
5. Kalkanı Kask Gövdesine bağlarken, 3000 LSLens, Kask Gövdesinin Kalkan tabanının konumuna bağlı olarak kalıplama parçasına müdahale edebilir.
Kalkan açma / kapama işleminin, ekran tabanı vb.. müdahale etmemesi için.
■ Bakım
Lenste kalan kir, Cam için bir deterjan kullanılarak çıkarılabilir.
Aşındırıcı maddeler veya aşındırıcı maddeler içeren temizlik maddeleri kullanmayın.
Shield lens with light sensitive function that changes the intensity of the lens depending on the intensity of sunlight.
A laminated structure is created by attaching this product to a helmet to equalize temperature difference between inside and outside of a helmet and prevent fogging of a view through a shield.
Also anti-fog treated.
From touring to racing, from amateurs to top riders, experience the most powerful lens that is trusted by all.
Easy to install, just stick it on the back of the shield.
[instruction manual for PROGRIP 3000LS LENS]
This innovative lens, after being attached to the shield of a helmet, enhances the total performance of the shield in various conditions with different fog and sunshine conditions.
Please read the following instructions carefully before attaching the 3000LS to the shield.
■Preparation
Please choose a cool, dry and dust-free place for installation.
With the shield of the helmet lowered, apply the masking tape along the opening of the shield (see the figure on the package).
When the shield is removed, the exact mounting location of the 3000LS lens will be noted.
Remove the shield from the helmet.
Clean and dry the shield according to the manufacturer's instructions.
Please make sure that there are no fingerprints, oil stains or water droplets on the shield.
For cleaning shields with a silicone surface treatment, we recommend a petroleum-based plastic cleaner (without silicates) to improve the adhesion of 3000LS.
Please install the 3000LS lens after cleaning and drying the shield.
■Installation
1. Remove the protection film from both sides of the lens.
Be careful not to get fingerprints or smudges on the lens.
Remove the protection film from the adhesive gaskets on the sides and around the lens.
2. Hold both ends of the lens and slowly curve the lens into a U-shape with the side with the double-sided tape facing the inside of the shield.(See diagram on package)
3. Once the lens is attached, make sure it is set in the correct place, and gently apply force to the entire area around the lens.
If the sticking position has shifted, gently lift up the misaligned position and gently apply force again.
4. After the lens has been placed in the correct position, firmly apply pressure to the entire area around the lens to ensure that the adhesive gasket is firmly attached.
Please allow 24 hours before attaching the shield to the helmet again in order to make the lens stick to the shield more firmly.
5. 3000LS lens may interfere with a braid depending on a position of a shield base of a helmet when a shield is attached to a helmet.
Please check if you can open and close the shield without any problem while adjusting the shield base to avoid interference.
■Maintenance
Residual dirt on the lens can be removed by using a glass cleaning agent.
Do not use abrasives or corrosive cleaning agents.