2017'den sonra CB1100RS / EX için Seat.
OEMSeat'a göre koltuk yüzeyinin eğimini, genişliğini, yüksekliğini ve şeklini inceliyoruz.
Binici tarafı mı? Her iki Yolcu tarafı da Sünger'in yeterli kalınlık ve genişliğine sahiptir ve koltuk yüzeyinin eğimi de incelenir.. Ayrıca Tandem turu yapanlar için tavsiye edilir ve Solo turu sırasında yükleri yüklemek daha kolaydır.
Oturma parçasının genişliği, sürüş konforunu geliştirmek için bir dereceye kadar sabitlendiğinden ve ayağını indiren kısım genişlik olarak daralırken, ayak da iyidir.
Kalıpta ateşlenmiş enjeksiyon süngeri kullanın. Minder iyi olduğundan ve yaşlılığın kötüleşmesi küçük olduğundan, uzun bir süre boyunca onu koruyabilirsiniz.
[Özellikler]
"Koltuk yüksek"
CB1100RS : 785mm (OEM) ⇒ 795 mm
CB1100EX : 780mm (OEM) 90 790 mm
? Koltukta düz blackLeather Tuck roll kullanma. Dikiş Hattı, Dikiş bitişidir, Çizgi Tipi, yarı yarıya düşer B Tipi.
? Tandem kayışı bir Bolt stop ve Standart Ekipmantır.
? OEMSeat kurulumuna benzer tuş kilidi metodudur.
? OEM Taşıyıcı? Üst kutu ile birlikte de kullanılabilir.
Süngerin sertliği, yaklaşık 60 ila 80 kg vücut ağırlığı standart bir ayarına dayanmaktadır.
This seat is for CB1100RS / EX after 2017.
The slope, width, height and shape of the seat have been reviewed compared with the original seat.
The thickness and width of the sponge is sufficient for both the rider and passenger sides, and the slope of the seat surface has been revised.It is recommended for pillion touring, and for solo touring, it makes it easier to carry luggage.
The width of the seating area is secured to a certain extent to improve the riding comfort, and the width of the area where the legs are lowered is narrowed so that the legs can fit well.
The injection sponge is fired in the mold.The cushioning is good and does not deteriorate over time, so you can use it for a long time.
[Features]
<>
CB1100RS: 785mm (stock) to 795mm
CB1100EX: 780mm (stock) to 790mm
・Plain black leather tack roll on the seat.Sewing lines are stitched, B type where the lines fall down in the middle.
・The pillion belt is bolted on as standard equipment.
・The key lock system is the same as the original seat.
・This product can be used with stock carrier and top box.
The hardness of the sponge is set to the standard for the weight of 60-80kg.