Koltuk yüzeyinin ön eğimi yatay, OEMSeat için 20mm (17 yıldan sonra 15 mm) Koltuk yüzeyi yükseltilmiştir.
Oturma pozisyonu yükseldikçe dizin kıvrımı yumuşak olur ve ayak çalışması kolaylaşır.
footpeg yükü arttı, göreceli eşek (Oturma yeri) Yük azaltılır ve yük azaltılır.
Uzun mesafe Touring için özellikle önerilir çünkü Sünger'in kalınlığı arttıkça sürüş hissi daha iyi olur.
Oturma bölümü, sürüş konforunu güvence altına almak için OEMSeat'den daha geniştir, ancak ayakları yere koyan parça, OEMSeat ile aynı genişliğe sahip olmuştur ve bu yüzden Stress olmadan bir tabure haline gelmiştir.
Seat üssü ile münhasır hale gelen, Tank Kapaklı Şili ve Yan kukuleta da eşit şekilde yükseltilmiş gibi görünüyor.
[Özellik]
Tandem beltStandart Ekipmanları. (Sadece Hook'un Braketini OEMSeat'dan yeniden yerleştirmek gerekir.)
Koltuk Montajı OEMSeat olarak anahtar ile gerçekleştirilir ve araba gövdesine işlenmesi hiç gerekli değildir.
Çünkü bir kalıpta ateşlenen Enjeksiyon süngeri kullanıyorum çünkü iyi yastık özellikleri ve az yaşlanma değişikliği olduğu için uzun süre korunuyor olabilir.
Düz blackLeather'ı kullanın.
Bütün dikişler Stitch ile biter.
PipingSpec. SIDE'nin dikiş hattındaki White's Piping'i içerir.
Dikiş anahtarlama Yolcu YAN A Tipi girer.
Süngerin sertliği, yaklaşık 60 ila 80 kg vücut ağırlığı standart bir ayarına dayanmaktadır.
The front inclination of the seat has been made horizontal, and the seat is 20mm higher than the stock seat (15mm higher than the stock seat in the 17th year and later).
By raising the seating position, the knee bend becomes more gentle and the step operation becomes easier.
The step load is increased, and the load on the buttocks (seat) is relatively decreased, and the burden is reduced.
The thickness of the sponge has been increased to improve the ride comfort, so it is especially recommended for long distance touring.
The seating area is wider than the stock seat to ensure comfort, but the area for the feet is the same width as the stock seat.
The base of the seat is specially designed, and the tank cover and the side cowl are evenly matched.
[Features]
Pillion belt standard.(Only the relocation of the hooks from the stock seat is required.)
The seat can be installed with the same key as the stock seat, and no modification to the vehicle body is required.
It is made of injection sponge, which is fired in the mold, so it has good cushioning and does not change with age, so you can use it for a long time.
Made of plain black leather.
All seams are stitched.
White piping is applied to the side seam line.
A type with stitching switch on passenger side.
The hardness of the sponge is set to the standard for the weight of 60-80kg.