Şimdiden kadroya alındı [S-3204] OriginalRear Temel, Üst ve Ön Anahtar olarak C-52 Kayma Siyahı, CIDE8 SIDE Mavi ve Dikişi S-03 Orta gümüş olarak ayarlar.
Tandem kayışı standart donanımdır. (Deri: Siyah / Dikiş: Orta gümüş)
Koltuk eğimi, koltuk yüzeyi öne düştü OEMRear Setlerine göre optimize edilmiştir.
Sertlik hızlanma yavaşlamasında faydalı olacağından, Rider ve Yolcu Kaskı gibi birkaç şey birbiriyle çarpışır.
Kepçe Bar tutulduğunda, yağmurlu Touring'de Eldivenler ıslanır ve soğuk havalarda eller akan rüzgarla üşür.
Eğer Tandem Kemerine yakınsa, Yolcu Eldiveni ıslanmaz ve akan rüzgar doğrudan soğuk havalarda salmaz.
Miktar: Çifti (Sol ve Sağ için) Grab Bar ile değiştirerek, Yolcu, omuz boyun bel yükünü azaltarak, duruş değiştirmek kolaydır. uzun mesafeli turlarda.
OEMRear Takımları Deri yerine Koltuk tabanından Özel Tasarım olacak, OEMRear Takımlarından değiştirilecektir
OEMRear Setlerde olduğu gibi, dekolman anahtarlarla çalıştırılır.
Ön ve arka montaj konumu ayar mekanizması OEM'e benzer şekilde yapılabilir.
Based on [S-3204] original rear seat which is already available, C-52 anti-slip black is used for the top and front changeover, C-58 anti-slip blue is used for the sides, and S-03 Mediam silver is used for the stitching.
Pillion belt is standard equipment.(Leather: Non-Slip Black / Stitching: Mediam Silver)
The slope of the seat surface has been adjusted for the stock rear seat which has a forward sloping seat surface.
The helmet of the rider and the passenger will not collide with each other.
If you hold the grab bar, your glove will be wet in rainy weather, and your hand will be cold in cold weather due to the wind.
The passenger's gloves will not get wet if they are near the pillion belt and the wind will not hit them directly in cold weather.
By changing the grab bars, the passenger can easily change their posture and reduce the burden on the shoulders, neck and back during long distance touring.
This is not a reupholstery of the stock rear seat, but a special design from the seat base.It is a replacement of the stock rear seat.
To remove the seat, use the same key as the stock rear seat.
The front and rear mounting position adjustment mechanism is the same as stock.