Esnek ve basınç ayarlıdır.
100mm Disk Öğütücü için Gold cinsi için aşındırıcı disk.
Esas olarak kaynak boncuklarının çıkarılması, BALI'nın çıkarılması, Pas çıkarma ve düz yüzey parlatma işlemlerinde kullanılır.
[Özellik 1 · Esnek ve ayarlanabilir basınç]
Aşındırıcı bez arka taban üzerinde durur ve yapışır, bu da nesneye basınç ve esneklik ayarlamayı mümkün kılar.
Ve eğer bir arka taban varsa, buna basmak, yüzey parlatma gücünü arttıracaktır.
Düzlemsel, eğri yüzey parlatma ve yüzey pürüzlendirme işlemlerinde güç gösterir.
[Özellik 2 · Yüzü gösterme gücünü göster]
・ Basıldığında, taban tarafına derinlemesine çarptığınızda basınç güçlenir.
・ Tamamen bastırırsanız, Yassıya yakın olacaktır, çünkü bükülme kaybolacaktır.
Bu noktadan itibaren, eğer yüzeyde bir çıkıntı varsa, yüzey işlemine güç verir çünkü kesime öncelik tanır.
(Kaynak boncuklarının parlatılması gibi)
* Ek *
Kanatlar yalnızca yana doğru düştüğü için, Kaynaklı Egzoz Sistemi Boncukunu düzleştirmek istediğinizde özellikle kullanışlıdır.
* Çok az kazma var, çünkü Bead dışındaki isabetler zayıf ve Eksi yüzünün çıkması zor.
[Özellik 3 · Düşük hızlı Öğütücü ile uyumluluk]
Normal bir Öğütücü ile kullanabilirsiniz, ancak yavaş Öğütücü ile mükemmel uyumluluğa sahiptir.
[Özellik 4 · Taşlama Alümina Hakkında]
Zımpara bezi taşlama tekerleği Alumina, genel Altın için.
Parlatma gücü Zirkonya'dan daha düşüktür, fakat aynı sayıda olsa bile son işlem Hafifdir.
[Disk Öğütücünün dönüş hızı hakkında]
Düşük hız (Düşük hız) İçinde kullanıldığında, merkezkaç kuvveti küçülür, böylece parlatma diski ve iş parçası arasındaki temas yumuşak olur.
Özellikle, tabanın sabit etkisi küçüktür. "Yumuşak" "Hava" Parlatma bezinin şekli, cilalanacak nesneyle uyumlu olmak kolaylaşır ve parlatma kesiminin kavisli yüzey şekli boyunca gerçekleştirilmesi kolaydır.
Ek olarak, cilalama bezinin saçılması nedeniyle aşınma, hasar, ısırma ve yakalanmayı azaltmak mümkündür.
* Son işlem sırasında düzgün şekilde çalıştırmanın kolay olması, Scratch'ın azalmasına da yol açar.
Öte yandan, ağır kesimde, daha zayıf bir vuruş ve dönme hızındaki azalma nedeniyle iş miktarındaki azalma nedeniyle kesme hızı daha yavaş olur.
"Düz" ve özellikle "Kes" Genel bir hızlı dönüş tipi kullanmanızı öneririz.
[Yavaş Değirmeni]
* Hız değiştirme fonksiyonu ve Hız kontrol cihazı ile düşük hızda yüksek Tork tipi Disk Öğütücü kullanmak yaygındır.
[Düşük hız ve yüksek hız ile uyumluluk]
Düşük hız <---> yüksek hız
Yumuşak / Hava / Düz / Kes
40/120/320
Flexible, pressure adjustable, good for beveling.
Abrasive discs for metal for 100mm disc grinders.
Mainly used for weld bead removal, deburring, rust removal and flat curved surface polishing.
[Feature 1 - Flexible and pressure adjustable]
The abrasive cloth is bonded to the backing base in an upright position and flexes to provide flexibility and pressure adjustment to the object.
The backing increases the flat grinding force when pressed.
It is effective for flat and curved surface polishing and facing.
[Feature 2 - Effective for grinding]
・As pressing it down, the deeper it hits the base side, the stronger the pressure becomes.
・As it is pressed completely, it becomes flat because it does not bend.
Therefore, if there is a protrusion on a flat surface, it is shaved in priority, and it is effective for surface preparation.
(Grinding of welded beads, etc.)
*Supplement*
Since the wings only fall to the side, it is very useful especially when you want to smooth the weld bead of the exhaust.
*Because of the weakness of the contact other than the bead, there is little digging and the negative side does not appear.
[Feature 3 - Compatibility with low-speed grinders]
It can be used with a standard grinder, but it also works well with a low speed grinder.
[Feature 4 - Grindstone Alumina]
The grinding wheel of the abrasive cloth is alumina for general metal use.
Polishing power is inferior to that of zirconia, but the finish is milder than that of zirconia.
[About the speed of the disc grinder]
When used at low speed (low rotation speed), the centrifugal force is reduced and the contact between the grinding disc and the workpiece becomes softer.
This makes the shape of the abrasive cloth more familiar to the workpiece, especially in the "soft" and "air" types where the fixing influence of the base is small, and makes it easier to perform abrasive cutting along the shape of curved surfaces.
In addition, the wear and tear, damage, biting and snagging caused by scattering of abrasive cloth can be reduced.
*It is also easy to operate evenly when finishing, leading to a reduction in scratches.
On the other hand, in heavy-duty cutting, the cutting speed becomes slower due to weaker contact and lower workload caused by reduced rotation speed.
For "Flat" and especially "Cut", recommending the use of a general high-speed rotation type.
[slow grinder]
*It is common to use a disc grinder with variable speed function, low speed and high torque type and speed controller.
[compatibility with low and high speeds]
Low speed <--------> High speed
Soft / Air / Flat / Cut
40 / 120 / 320