1mm ince tip, kesme hızı yüksektir ve Net donatı Spec.
100mm Disk Öğütücü için Genus Gold'un Kesme Kesme Whetstone.
Genel olarak Altın cinsini kesmek için kullanılır.
[Özellikler / Kalınlık 1mm]
İnce ve 1 mm kalınlığındadır ve özellikle ince malzemelerin kesilmesi için uygun olan yüksek kesme hızına sahiptir.
İnce olmasına rağmen, bir özellik haline geldi.
[Bağlantı kesilmesi hakkında]
Aslında "Kes" İnce bölümde değil "Tıraş" devam edip keseceğim.
Kullanırken sert bir şekilde bastırmak yerine, yukarıdaki resim "Denerken ilerleyeceğiz" dır Düşük tüketimi ve düz gitmek kolaydır.
[Disk Öğütücünün dönüş hızı hakkında]
Düşük hız (Düşük hız) İçinde kullanıldığında, merkezkaç kuvveti küçülür, böylece parlatma diski ve iş parçası arasındaki temas yumuşak olur.
Özellikle, tabanın sabit etkisi küçüktür. "Yumuşak" "Hava" Parlatma bezinin şekli, cilalanacak nesneyle uyumlu olmak kolaylaşır ve parlatma kesiminin kavisli yüzey şekli boyunca gerçekleştirilmesi kolaydır.
Ek olarak, cilalama bezinin saçılması nedeniyle aşınma, hasar, ısırma ve yakalanmayı azaltmak mümkündür.
* Son işlem sırasında düzgün şekilde çalıştırmanın kolay olması, Scratch'ın azalmasına da yol açar.
Öte yandan, ağır kesimde, daha zayıf bir vuruş ve dönme hızındaki azalma nedeniyle iş miktarındaki azalma nedeniyle kesme hızı daha yavaş olur.
"Düz" ve özellikle "Kes" Genel bir hızlı dönüş tipi kullanmanızı öneririz.
[Yavaş Değirmeni]
* Hız değiştirme fonksiyonu ve Hız kontrol cihazı ile düşük hızda yüksek Tork tipi Disk Öğütücü kullanmak yaygındır.
[Düşük hız ve yüksek hız ile uyumluluk]
Düşük hız <---> yüksek hız
Yumuşak / Hava / Düz / Kes
40/120/320
1mm thin, high cutting speed and net reinforcement to prevent breakage!
Metal grinding wheels for 100mm disc grinders.
Mainly used for cutting metal.
[Features, Thickness 1mm]
It is especially suitable for cutting thin materials.
It is thin, but the net reinforcement makes it difficult to break.
[About the disconnect]
In fact, not "cutting" but "scrapng" in a thin section.
When using it, rather than pressing it strongly, use it in a way that "advances while applying it" with the image above to reduce wear and tear and to proceed straight.
[About the speed of the disc grinder]
When used at low speed (low rotation speed), the centrifugal force is reduced and the contact between the grinding disc and the workpiece becomes softer.
This makes the shape of the abrasive cloth more familiar to the workpiece, especially in the "soft" and "air" types where the fixing influence of the base is small, and makes it easier to perform abrasive cutting along the shape of curved surfaces.
In addition, the wear and tear, damage, biting and snagging caused by scattering of abrasive cloth can be reduced.
*It is also easy to operate evenly when finishing, leading to a reduction in scratches.
On the other hand, in heavy-duty cutting, the cutting speed becomes slower due to weaker contact and lower workload caused by reduced rotation speed.
For "Flat" and especially "Cut", recommending the use of a general high-speed rotation type.
[slow grinder]
*It is common to use a disc grinder with variable speed function, low speed and high torque type and speed controller.
[compatibility with low and high speeds]
Low speed <--------> High speed
Soft / Air / Flat / Cut
40 / 120 / 320