Jant, jant teli, Nipel Adet: 1 Set 3'li Ürün
OEM hub uyumlu!
Jant, jant teli ve nipeli birleştiren miktardır.
Bir tekerleği monte ederken, kullanılan Spoke / Nipple'ın Vidanın deformasyonu ve aşınması nedeniyle Jant'ı deforme etmesi zordur, bu nedenle Spoke ve Nipel temel olarak aynı zamanda değiştirilir.
Jant seti, değişim için gerekli Miktarı kullanır: Bir Set olarak ayarlayarak, zahmetli Parçalar seçmenize gerek yoktur.
OEM Jant boyutunu ayarlamaya ek olarak, Motocrosser'ı Enduro Machine'e dönüştürürken en etkili Arka 18 İnç boyutu da dizilimdir.
Mevcut rekabet araçlarından geniş bir araç yelpazesini genişletmek.
[R50 Jant]
Racing specRim, Motocross ve Enduro'da Race'i kullanmayı amaçlıyordu.
Jant için optimum malzeme miktarı
Çelişkili güç ve ağırlık koşullarını önemli öğeler olarak dengeleyin.
Jant vuruşlarının neden olduğu sorunu azaltmak için jant sertliği.
Boncuk durdurucu delikleri: Ön / 1 konum, Arka / 2 konum
Valf deliği: Ön / Arka için bir konum
[Alüminyum nipeller]
A2024 malzeme kullanılarak yüksek mukavemet ve esnek özelliklere sahiptir.
6Collar ayarı, en sevdiğiniz rengi seçebilirsiniz.
[Paslanmaz Çelik]
Mukavemet, paslanmaya dayanıklı ve yüksek mukavemete sahip SU304 bileşenlerinin Tabana hassas bir şekilde ayarlanmasıyla sabitlenir.
3-piece set of rim, spoke and nipple
Stock hub compatible!!!
A 3-piece set of rims, spokes and nipples that is ideal for refreshing wheel rims.
When assembling a wheel, it is necessary to replace spokes and nipples at the same time because used spokes / nipples are deformed and the screws are worn out, making it difficult to remove runout from the rim.
The rim set includes all the parts you need to replace the rim, so you don't have to worry about selecting the right parts.
Not only the stock rim size, but also the rear 18 inch size which is the most effective size for converting motocrosser to enduro machine is lined up.
A wide range of vehicles from current competition vehicles.
[R50 rim]
Racing spec rims intended for use in motocross and enduro racing.
A7050 T6 aluminum alloy is used as the optimum material for the rim, and the cross-sectional shape is pursued.
It is designed to balance the contradictory conditions of strength and weight.
Rigid rims to reduce problems caused by rim strikes.
Bead stopper hole: Front / 1 location, Rear / 2 locations
Valve hole: 1 location for both front and rear
[Aluminum nipple]
It is made of A2024 material and has both high strength and flexibility.
6 colors are available, you can choose your favorite color.
[stainless steel spokes]
The strength is secured by fine-tuning the composition based on SU304, which is highly resistant to rust.