Karbüratör / FI TÜM MODELİNE takılabilen OEM Koltuk Kaputu ile takılabilen kalın bir çift koltuktur.
Koltuğun koltuk genişliği, OEM Koltuğundan daha geniştir, böylece sürüş rahattır ve ayak, ayak kısmını incelterek ve kare köşeleri ortadan kaldırarak OEM Koltuğuna benzer.
Oturma pozisyonu yükseldikçe, dizin bükülmesi gevşer ve sürme duruşu ayakta durma pozisyonuna yaklaşır ve kalçalardaki yük ayak pedalına geçer.
Footpeg yükünü arttırarak, kalçalardaki yük azalır ve vücudu footpeg ile çalıştırmak daha kolaydır.
Uzun turu daha konforlu ve keyifli hale getiren bir koltuk.
Kalıpta pişirilmiş enjeksiyon süngerini kullanın.
İyi Yastık özelliklerine ve zamanla çok az bozulmaya sahiptir, böylece uzun süre kullanabilirsiniz.
■ Özellikler
Tüm deri için düz siyah kullanılır ve orta dikiş beyaz bir Boru kaplamasıdır.
Boru Hattı, Tank tarafına uzanan bir A tipidir.
■ Kurulum
Araç gövdesine montaj için Koltuk Damperinin OEM Koltuktan yeniden konumlandırılması gerekir.
Birlikte verilen Braketi Yakıt Deposu tarafına takın ve arka tarafı OEM Koltuk Cıvatası ile OEM Koltuk gibi sabitleyin.
OEM Kepçe Rayı veya K & H Arka Çamurluk ile kullanılabilir.
Y'nin Dişli Taşıyıcısı ile birlikte kullanıldığında, Montaj Donanımı ters çevrilmelidir.
This is a thick double seat that can fit the stock seat cowl on all years of carburetor / FI models.
The width of the seat surface is wider than the stock seat to improve the ride comfort, and the part where you put your feet down is narrower and less angular to achieve the same footing as the stock seat.
The higher the seating position, the looser the bend of the knees becomes, and the riding posture becomes closer to the standing posture, and the load of the buttocks is transferred to the step.
By increasing the step load, the load on the buttocks is reduced and it is easier to control the vehicle with the step.
It is a seat that makes long touring more comfortable and enjoyable.
The injection sponge is fired in the mold.
The cushioning is good and does not deteriorate over time, so you can use it for a long time.
■Features
The entire leather is plain black, with white piping at the center seam.
This is the A type where the piping line extends to the tank side.
■Mounting
It is necessary to transfer the seat damper from the stock seat for installation to the vehicle.
Install the attached bracket on the gasoline tank side, and fix the rear side with the stock seat bolts just like the stock seat.
It can be used with stock grab rails or K & H rear fenders.
When using with Y's gear carrier, it is necessary to attach the mounting bracket upside down.