[Boyut (Kablo demeti uzunluğu)]
Har Giriş Kablo Demeti / yaklaşık. 1300mm
・ Çıkış Kablo Demeti / yaklaşık 250mm
[Şartname]
· Su geçirmez tasarım
Key Ana tuş ile birlikte AÇMA / KAPAMA
Large 3 Büyük boyuta kadar ataşmanları takın
・ Mermi Tipi Terminal (CA / CB103) 3 bağlantı noktası
・ Seyahat akımı: 7.5A x 2 hat (Önerilen akım: 4A *) , 5A x 1 sistemi (Önerilen akım: 2A *) * PTC Termostor ile kullanım için
・ 20A yüksek çıkış tasarımı
【Emtia bileşimi】
· Unit1unit
・ Çift Taraflı Bant x 1
・ Konektör x 1
・ Kravat Bandı × 2
・ Kravat Bandı (Yayın türü) x2
* Terminal bağlantı parçasını suya maruz kalmayacağı bir yerde saklayın.
* PTC termistörü, akan akımı ısı ve dirençle yönetir. Belirtilen akımı aşan akım aktığında, direnç değeri yüksek olur. (Sıcak olur) Engellenecek. Elektronik cihaz bu durumda bağlı kalırsa, sıcaklık düşmez ve ana ünite eriyebilir. Bağlı ekipman çalışmayı durdurursa, hemen çıkarın.
* Ünitenin kendisi ısı ürettiği için, koltuğun altı gibi ısının birikmesinin kolay olduğu bir yere monte edilmesini önermiyoruz.
* Her elektrikli ekipmana bağlantı için lütfen ayrı olarak kablolayın.
* Ürün özellikleri üretici nedenleriyle değişebilir. Lütfen aklınızda bulundurun.
[Size (harness length)]
・Input harness / approx. 1300mm
・Output harness / approx. 250mm
[Specification]
・Waterproof design
・Power ON/OFF by main key interlocking
・Attach up to three accessories individually
・Bullet terminal (CA/CB103) 3 ports
・Trip current: 7.5A x 2 systems (recommended current: 4A*), 5A x 1 system (Recommended current: 2A*) *due to use of PTC thermistor
・High power design of 20A
[Product Configuration]
・Main unit x 1
・Double-sided tape x 1
・Wiring connector x 1
・Binding bands x 2
・Cable ties (release type) x 2
*Keep the terminal connections away from water.
*PTC thermistors manage the current flowing through them by heat and resistance values.When the current exceeds the specified current, the resistance value becomes high (high temperature) and it will shut down.If an electronic device is left connected in this state, the temperature will not drop and there is a possibility that the body will melt.If the connected equipment stops working, disconnect it as soon as possible.
*Because the unit itself generates heat, it is not recommended to install the unit under the seat or in other places where heat is likely to accumulate.
*Please do the wiring processing separately for the connection to each electric equipment.
*There may be changes in product specifications due to the manufacturer's reasons.