・ USB Tip-C
L şeklindeki konektörler, Kablonun dışarı çıkmasını ve telin kırılmasını önler.
Ayrı bir güç kaynağına gerek yoktur.
Telefonunuzu bu Cable1 bilgisayar ile şarj edin
Sadece fren anahtarını takarak gücü çıkarma.
Hızlı şarj ile uyumludur.
[Koşum şefi]
Vücut
Type-CConnector → trafo: Yaklaşık 800mm
Transformatörden Plus hattına: Yaklaşık. 180mm (FuseCase ile)
Transformatörden Eksi hattına: Yaklaşık 800 mm
Uzatma koşum
Artı çizgisi: Yaklaşık. 1,200mm
Eksi çizgi: Yaklaşık 800 mm
Fren anahtarı: Yaklaşık 270 mm
Dallanma Demeti: Yaklaşık. Bölünmeden 50 mm sonra
[Giriş]
Giriş voltajı: DC12V
DC12V: DC12V-16V
Maksimum giriş akımı (yüksüz) : 5mA veya daha az
[Çıkış Limanı]
Çıkış Voltajı: 18W (5V / 3A, 9V / 2A, 12V / 1.5A)
[Ürün İçeriği]
・ UnitBody (MINIGlassTube Sigorta Φ5.2X20 / 250V5A) x1
・ Gidon ClampX1
Fren Anahtarı Bifurkasyon Demeti (Artı çizgisi) x1
Uzatma koşum (Artı çizgisi) x1
Uzatma koşum (Eksi ışınlar) x1
Kablolama KonnektörüX1
・ Release typeTie BandX1
Band Tie BandX2
* Düz tip terminal ise (187 türü) fren anahtarı için kullanılmazsa ekli uzatma kablo demetini kullanın (CA103) bağlamak için.
* Üretici nedenlerinden dolayı ürün özelliklerinin değişebileceğini lütfen unutmayın.
・USB Type-C
・The L-shaped connector prevents the cable from sticking and disconnecting
・No need for a separate power supply
・You can charge your phone with just this cable
・By simply interrupting the brake switch, you can extract power.
・Supports fast charging
[Harness length]
■Body
・Type-C connector to transformer: Approx. 800mm
・Transformer to positive wire: Approx. 180mm (including fuse case)
・Transformer to negative wire: Approx. 800mm
■Extension Harness
・Positive wire: Approx. 1,200mm
・Negative wire: Approx. 800mm
■Brake switch: Approx. 270mm
・Branch harness: Approx. 50mm after branching
[typing]
・Input Voltage: DC12V
・Input voltage range: DC12V-16V
・Maximum input current (no load): 5mA or less
[Output]
・Output rated efficiency: 18W (5V/3A, 9V/2A, 12V/1.5A)
[Set components]
・Main unit (mini glass tube fuse Φ5.2 x 20 / 250V 5A) x 1
・Handlebar Clamp x 1
・Brake switch branch harness (positive wire) x 1
・Extension harness (positive wire) x 1
・Extension harness (negative wire) x 1
・Wiring connector x 1
・Release type cable-tie x 1
・Binding bands x 2
*When the brake switch does not have a flat terminal (Model 187), connect it with the supplied extension harness (Model CA103).
*This product is compatible with USB Power Delivery and may not be used with devices that do not support high power fast charging.
*Not available for Daytona headset DT-01, DT-E1, other companies' headsets and some heated cigarettes.Also, some cameras (including single-lens reflex / mirrorless cameras) may not be usable.
*There may be changes in product specifications due to the manufacturer's reasons.