Işık Ünitesi ile
[Boyut]
Genişlik : Yaklaşık 760 mm
Ön / arka uzunluk : Yaklaşık 500 mm
Yükseklik : Yaklaşık 520 mm
[Malzeme]
CTP
[Ürün İçeriği]
Kaporta Gövdesi, Braket Seti, Ekran, Ekran Vida Seti
* Bu başlık, yurtdışında üretilen genel amaçlı bir üründür, bu nedenle çizikler, çizikler ve sürtünme vb. Olabilir.. bu, deliklerin sığmamasına neden olabilir ve kurulum için değiştirilmesi gerekebilir. Lütfen satın almadan önce aşağıdakileri anladığınızdan emin olun.
* Işık ünitesi ve kaporta birbirini engelleyebilir, bu durumda kaputun engelleyici kısmının çıkarılması gerekir.
* Çatal ve kaporta birbirini engelleyebilir, bu nedenle sol ve sağ tarafların hareket aralığını kontrol etmeniz ve parazit varsa kaputu tıraş etmeniz gerekir.
* Diğer engelleyici parçaların kesilmesi, traş edilmesi veya başka şekilde işlenmesi gerekir.
* Ekli ışık ünitesi, ana kablo demetinden bir uzatma kablo demeti ile imal edilmelidir.
* Destek ve kaporta arasındaki delik, kaputun konumuna bağlı olarak değişebilir. Bu durumda, kaputtaki deliği genişletmeniz gerekir.
* Ekran ve kaporta deliklerinin eşleşmediği durumlar vardır, bu durumda, kaputun merkez deliğinden dışarıya perde ve kaporta deliklerini bir kuyu somunu ile sabitlemeniz ve daha sonra olmayan parçaları genişletmeniz gerekir. bir dosya ile eşleşir.
* Bazı lotlarda ekran için kaporta tarafında delik yoktur. Bu durumda, ekrana uyması için delikleri açın.
* Burada listelenenlerin dışındaki işleme yöntemleri mevcut değildir, bu nedenle lütfen gerçek araca danışın.
* Ürün işleme tabi olduğundan, yüklenememesi nedeniyle iade kabul edemiyoruz.
* Lütfen boyamadan önce ürünü işlediğinizden ve kurduğunuzdan emin olun.. Boyadıktan sonra hiçbir iddia kabul edilmeyecektir.
* Lütfen ürün özelliklerinin üreticinin nedenine bağlı olarak değişebileceğini unutmayın.
With light unit
[Size]
Width: Approx. 760mm
Front and rear length: Approx. 500mm
Height: Approx. 520mm
[Material]
FRP
[Components]
Cowl body, bracket set, windshield, windshield screw set
*Please make sure to read the notes before purchasing.
*7 inch projector LED headlight unit and the same type of light unit are used for the lights.
*Because this cowl is a universal product made non Japanese, it may have some scratches and scuffs, and the holes may not fit, so some modification is required for installation.Please make sure you understand the following information before purchasing.
*The light unit and cowl may interfere with each other, in which case it is necessary to shave the interfering part of the cowl.
*There is a case that the fork and the cowl interfere with each other, check the range of movement of both sides and if it interferes, it is necessary to shave the cowl.
*Other interfering parts need to be cut or shaved.
*The supplied light unit requires an extension harness to be fabricated from the main harness.
*Depending on the positioning of the cowl, the hole between the bracket and the cowl may be misaligned.To do this, you will need to widen the hole in the cowl.
*In some cases, the holes of the windshield and the cowl do not match, in that case, you need to fix the windshield with the well nut from the center hole of the cowl to the outside, and widen the holes with a file in order.
*Depending on the lot, some of them do not have the hole for the windshield on the cowl side.In this case, please drill the holes in order to match the windshield.
We will not provide information about processing methods other than those mentioned here, so please verify according to your actual bike.
*Any returns will not be accepted due to inability to install the product.
*Please be sure to process and install before painting.Any claims after painting are not accepted.
*There may be changes in product specifications due to the manufacturer's reasons.