KEPSPEED tarafından yapılmıştır
[Teknik. ]
·Siyah (Ayrıldı) :Dünya
Beyaz (üst, en iyi, tepe) :Yüksek ışın
·Mavi (Sağ) : Düşük ışın
[Boyut]
Toplam Uzunluk Yaklaşık: 135mm (yaklaşık dahil). Üstün 10mm çıkıntısı)
Maksimum çap: Yaklaşık 165 mm
Braket Kurulum Aralığı: Esnek Kablo Uzunluğu
[Dahil Parçalar:] Valf: H4Halojen ampul (3000-3300K'ya eşdeğer renk sıcaklığı)
[Menşei ülke] Çin
* Şeffaf oluklu kauçuk yalnızca kasaya dahildir.
* Stok hız göstergesini ve nötr ışığı koyacak yer yoktur.
* Kablolamaya gelince, takılı olan kablo, kordon kesilmiş durumda olduğu için bazı modifikasyonlar gereklidir.. Lütfen bunu aklınızda bulundurun.
* Resimde gösterilen ahşap kutu sadece fotoğraf amaçlıdır ve ürüne dahil değildir.
* Fotoğraftaki diğer parçaları içerir.
* Üretici nedenlerinden dolayı ürün özelliklerinin değişebileceğini lütfen unutmayın.
* Her ürün için, detaylarda sunulan görselden biraz farklı olan birkaç nokta var, ancak asıl ürüne öncelik vereceğiz, bu yüzden lütfen anlayın.
* Bir motosiklet bakım uzmanı mağazasında montaj işi yapacak bir motosiklet bakım teknisyeni arıyoruz.
* Sürüşe başladıktan sonra, "ilk gevşeme" denen şeyin meydana gelmesine dikkat edin ve beklenmedik sorunları önlemek için sık sık denetimler yapın.
[Üretici Garantisi Hakkında]
* Taşıma probleminden dolayı ufak çiziklerin oluşacağı durumlar vardır.
* Ürünün değerini veya işlevini ciddi şekilde bozan kusurlar dışında garanti kapsamında değildir.
[Kurulum]
* Kurulum yöntemi yaklaşık olarak OEM ürünleriyle aynıdır.
* Lütfen sol ve sağ cıvata ile far braketine sabitleyiniz.
* Sayaç ve nötr lamba, fara entegre edilemez. Lütfen ayrı kurulum talimatlarına bakın.
* Kablolama hala kesilmiş olduğu için değişiklik yapılması gerekir.
* Kısa devreye neden olabileceğinden, bilgili bir kişinin bağlanmadan önce çalışması ve bağlantıyı kontrol etmesi gerekir.
* Lütfen kablolama hatalarından kaynaklanan kısa devre kazalarının üretici garantisi kapsamında olmadığını unutmayın.
* Kablo prizi keskin durumda.
* Ürünü olduğu gibi kullanırsanız, kablolamanın kesilme veya kısa devre olma ihtimali vardır.
* Verilen şeffaf oluklu kauçuğu uygun şekilde kullanın.
■Made by KEPSPEED
[Specification]
・Black (left): Grounding Cable
・White (top): high beam
・Blue (right): low beam
[Size]
・Total length approx.: 135mm (including approx. 10mm projection at the top)
・Maximum diameter: Approx. 165mm
・Bracket mounting pitch: About 15cm
[Components] Valve: H4 halogen bulb (color temperature equivalent to 3000-3300K)
[Country of origin] CHINA
[Notes on purchase]
*All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
※Transparent groove rubber is included only with the case.
※There is no place to put the stock speedometer and neutral light.
※Some modification is required for the wiring as the supplied cable is cut off from the cord.
*The wooden box in the image is for photographic purposes only and is not included.
*Images may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
※For each product, there are a few points that differ slightly from the image introduced in detail, but GM-MOTO will give priority to the actual product.
*Please have assembly work done in a specialist shop regarding motorcycle maintenance.
※After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.
*Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.
[About the installation]
※The installation method is generally the same as the stock one.
※Fix to the headlight bracket with the bolts on both sides.
*The meter and neutral lamp cannot be integrated into the headlight.Separate installation instructions must be developed.
※The wiring is still cut and must be modified.
*Please have a knowledgeable person work on and check the connection before connecting, as it may cause a short circuit.
※The wire extraction port is in a sharp condition.
*If using it as is, there is a possibility that the wiring will be cut or short-circuited.
※Use the supplied clear groove rubber as appropriate.