Tamamen yeni tasarım
İşte burada, sıkmak daha kolay !.
Flanşla birlikte gelen Cıvata, Flanşı sabitlemek için de dahil edilmiştir, ancak onu iyi ısı iletimi olan Titanyum Cıvata ile özelleştirerek, performans daha da geliştirilecektir !.
Conta (M3670) dahil Miktar: 1 adet. Dahil..
Daha iyi etki için 2 veya 3 sayfa daha ekleyebilirsiniz.. (* Çerçeveye bağlı olarak 1-2 sayfa sınır olabilir.. )
Lütfen bu gibi durumlarda BORE-ACE ürünlerini kullanın.. ]
1: Karbüratör Frame ile temas halinde.
2: Karbüratör bir açıyla takılır
3: Manifold bükülmüş.
4: karbüratör ihmal
5: Yüksek performanslı bir karbüratörle değiştirdim ve pek bir şey değişmedi.
[Çeşitli Adaptör türleri]
Negatif Basınç Adaptörü
BORE-ACEManifold'u kullanırsanız, negatif basınç ekstraksiyonunu kaybedersiniz.
NORMAL Gaz musluğu yalnızca PRI konumunda çalışabilecektir. (Rezerv çalışmayacak)
Bir NORMAL Gaz musluğunun bile geçiş yapabilmesi için negatif basıncı alması gerekecektir.
Negatif Basınç Adaptörünün amacı, negatif basınç oluşturmaktır.
Bu ürün, güç verme amaçlı değildir.
Giriş Yardımı
Eliptik Bağdaştırıcının evrim VERSİYONU olacaktır.
Karışım, motora daha yüksek hızda beslenir.
Completely new design
It is easier to tighten.
The bolts are included in the kit, but you can use titanium bolts for better heat conduction.
One gasket (M3670) is included in the kit.
You can add 2 or 3 more sheets to make it more effective.(*Depending on the frame, 1-2 sheets may be the limit.)
[Please use BORE-ACE products in such cases.]
1: Carburetor is in contact with the frame
2: Carburetor is attached at an angle
3: Manifold is bent
4: Carburetor dropout
5: When you can't find any difference after installation of high-performance carburetor
[Various adapters]
■Negative pressure adapter
If you use the BORE-ACE manifold, you will not be able to extract the negative pressure.
The stock gas cock can only be run in the PRI position (the reservoir will not work)
It is necessary to take out the negative pressure so that it can be switched with the stock gas cock.
The purpose of the negative pressure adapter is to obtain the negative pressure.
This product is not designed to increase power.
■Intake Assist
It is an advanced version of the elliptic adapter.
The mixture is fed into the engine with a higher velocity.