Yalnızca OEMArka Çamurluk/Tandem basamak tutucu için
Destek Üst kasa: Monokey, Mono-kilit
En büyük yük ağırlığı (Monkey üst kasa) :6kg
[aynı anda yüklenen belirtilen öğeler]
・Maymun:M5Base
・Tek kilit:M5MBase
* Çamurluk eliminatör kiti ile birlikte monte edilmesi mümkün değildir.
*30l'den küçük MM taban, B32 ve monolock kasalar ve M5M taban, 30l'den düşük monolok kasalar için (B270N, B27N, B260NX, E250, E230, vb.) lastik tıpa bazı yerlere temas etmeyeceğinden ve sürüş sırasında tıkırdamaya neden olacağından kullanılamaz.
*GIVI tertibatları ve Daytona orijinal tertibatları, GIVI olmayan kasalarda kullanılmamalıdır.. Daytona ve GIVI, GIVI dışı vakaların kullanımından hiçbir koşulda sorumlu tutulamaz.
*Boyama, kaynak, yüzey işleme, çizik, çapak, bozulma vb. farklılıklar olabilir.. ürün malzemeleri, üretim yöntemleri, bireysel ürün farklılıkları, yurtdışı nakliye koşulları vb.. Lütfen önceden anlayın.
*Ürün ile araç arasındaki bireysel farklılıktan dolayı delik hizalama bozukluğu, ön ve arka, sol ve sağ paralellik farkı, araç kaportasına temas vb.. Bu nedenle, kurulum işinin iyi donanımlı bir motosiklet mağazasında veya sertifikalı bakım tesisinde kalifiye bir tamirci tarafından yapılması tavsiye edilir.. Durum gözlemlenirken her parçanın geçici olarak sabitlenmesi ve son olarak sıkılması önerilir.
* Üretici nedenlerinden dolayı ürün özelliklerinin değişebileceğini lütfen unutmayın.
For stock rear fender / pillion step holder only.
Compatible Top Cases: Monokey, Monolock
Maximum loading weight (monokey top case): 6kg
[specified items installed at the same time]
・Mono key: M5 Base
・Monolock: M5M Base
*It takes more than 120 days to deliver the product from Italy.
*Additional work may be required and it may be difficult to install on the vehicle.
*Fender eliminator kit cannot be installed at the same time.
*MM base cannot be used with B32 and monolock cases less than 30l, and M5M base cannot be used with monolock cases less than 30l (B270N, B27N, B260NX, E250, E230, etc.) because the rubber stopper will not be in contact with some places and it will cause rattling during riding.
*GIVI fittings and Daytona original fittings should not be used on non-GIVI cases.Daytona and GIVI cannot be held responsible in any way for the use of non-GIVI cases.
*There may be differences in painting, welding, surface treatment, scratches, burrs, and distortions due to product materials, manufacturing methods, individual product differences, and overseas shipping conditions.
*Due to the individual difference between the product and the vehicle, there is a possibility of hole misalignment, difference in parallelism between front and rear, left and right, and contact with the vehicle cowl, etc. Therefore, it is recommended to have the installation work done by a skilled mechanic at a well-equipped motorcycle shop or certified maintenance facility.For installation, temporarily fasten each part and finally tighten them while observing the condition.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.