[Ürün İçeriği]
・ UnitBody
・Elektro Musluk X 1
・ Çift Taraflı Bant x 1
・Bağ Sargısı X 2
・Bağ sarma X 2'yi serbest bırakın
Özel DC12V ürünü
[Çıkış maksimum büyük akım] 20A
7.5AX2 olarak derecelendirildi
Derecelendirilmiş 5AX1
[Vücut ölçüsü] Uzunluk42mmXGenişlik26mmXTalınlık32mm
* Üretici nedenlerinden dolayı ürün özelliklerinin değişebileceğini lütfen unutmayın.
[Dikkat]
1, Bu ürün DC12V araçlar için genel amaçlı bir üründür.
Bu ürün, aracın veya elektrikli bileşenlerin teknik özelliklerine bağlı olarak kullanılamaz.
Kullanılan elektrikli bileşenlerin arızasını veya arızasını garanti edemeyiz.
Motor çalıştırıldığında ECU'nun voltajı algılaması ve ardından motorun çalışması olasılığı vardır.. Lütfen onayladıktan sonra kullanın.
2, Bu ürünün toplam maksimum akımı 20A'dır.
İzin verilen maksimum akım 7.5AX2 ve 5AX1 olarak derecelendirilmiştir.
(Önerilen akım 4.0A X2 ve 2.5AX1'dir.. Lütfen bu ürünü kullanmadan önce elektrikli bileşenlerinizin maksimum akımını ve özelliklerini ve aracınızın aküsünün özelliklerini onaylayın.. Çıkış, aracın pil ve güç üretim kapasitesini aşmayacaktır.
3, Bu ürünün bağlantı kısmı CA/CB104 giboshis kullanır (4,0 mm).
Lütfen kabloları elektrikli pense vb. ile sabit bir şekilde kıvırın.. giyotin terminaline kablolamanın sürekli olarak örtülmesi yönünde.
Giyotin terminallerini güvenli bir şekilde bağladığınızdan emin olun.
*4.0 mm çapında bir konektör kullanın (CA/CB104) bağlantı için.
4, ana ünite kısmı su geçirmezdir.
Bağlantı kısmında kısa devre olmaması için lütfen montaj noktasına dikkat ediniz.
Bu ürün, yerleşik bir koruma devresi ile donatılmıştır. (PTC termistörü) çünkü koruma devresini aşan bir aşırı akım geçtiğinde başarısız olabilir.
Kısa devre durumunda devre geçici olarak kapatılır.
5, Kısa devre, aşırı akım veya dalgalanma durumunda, ünite birkaç saniye soğutularak devre kurtarılacaktır.
Kısa devrenin nedenini belirleyin ve düzeltin.
Sorunun nedeni gözetimsiz bırakılırsa yangına neden olabilir.
6,PTC termistörü, akımın direncinin neden olduğu ısı miktarı ile akımı keser.
Koruma devresi etkinleştirilirse, elektrikli bileşenleri hemen çıkarın.
Olduğu gibi kullanırsanız ana gövdenin deforme olma veya çözülme ihtimali vardır.
Üniteyi, motor ısısı nedeniyle ünite sıcaklığının 80°C'nin üzerine çıkacağı bir yere kurmayın.
Akım kesilebilir ve cihaz kullanılamaz hale gelebilir.
7, Motoru çalıştırmadan elektrikli bileşenlerin sürekli kullanımı pilin bitmesine neden olabilir.
Lütfen kısa bir süre kontrol edin veya motor çalışırken kullanın.
Motoru çalıştırmadan önce elektrikli bileşenlerin kapatılması önerilir.
8, Pil bittiğinde veya pili şarj ederken bir güçlendirici kablo veya hızlı pil şarj cihazı kullanırsanız, ünitenin erimesi veya bozulması olasılığı vardır.
9, Bu ürünle çok sayıda elektrikli bileşen kullanırsanız pil boşalacaktır.
Akü kışın boşalmaya devam ederse akü yükselecektir, bu nedenle lütfen günlük bakım ve voltaj kontrolü yapın.
Kijima'nın pil denetleyicisini kullanmanız önerilir (304-6261) voltaj kontrolü için.
Ayrıca, spesifikasyonlara göre voltaj belirli bir seviyenin altına düştüğünde lityum iyon pilin yetersiz şarj olma olasılığı vardır.
10, Kurulumu kontrol etmek için lütfen bir test cihazı kullanın.
11, lütfen vinil bant vb. ile yalıtın. hatasız, çünkü demir kısım, ekipmanı bağlamayan eksi telin boncuk terminaline dokunduğunda kısa devre yapıyor.
12, Yukarıdakilere dikkat edildikten sonra ana ünite kapanırsa, kullanılacak elektrikli bileşenleri seçin veya elektrikli bileşenleri başka bir yere taşıyın.
13, Çalışırken ana anahtarı kapattığınızdan emin olun.. Ana anahtar AÇIK konumdayken kabloları takmayın veya çıkarmayın.
Kısa devre nedeniyle ekipman arızası olasılığı vardır.
Çalışma sırasında araç gövdesinin düşmesi tehlikelidir, bu nedenle araç gövdesi sabitken düz bir yüzeyde çalışın.
[Set components]
・Unit body
・Electro Tap x 1
・Double sided tape x 1
・Cable Tie x 2
・Release Cable Ties x 2
・DC12V only
[Maximum output current] 20A
・Rated at 7.5A x 2
・Rated 5A x 1
[Body size] Length: 42mm x Width: 26mm x Thickness: 32mm
*There may be changes in product specifications due to the manufacturer's reasons.
[Instructions for use]
1, This is a universal product for DC12V vehicles.
This product may not be used depending on the specifications of the vehicle or electrical components.
The malfunction or failure of the electrical components which have already used are not compensated.
In some vehicles which the ECU detects the voltage to start the engine, mulfunction will be arised.Please check before use.
2, The total maximum current of this product is 20A.
The maximum allowable current is rated 7.5A x 2 and 5A x 1.
(The recommended current is 3 systems of 4.0A x 2 and 2.5A x 1.Please confirm the maximum current and specifications of the electrical components used and the specifications of the battery in the vehicle before use.The output will not exceed the battery and power generation capacity of the vehicle.
3, The connection part of this product uses CA / CB104 crimp terminal (4.0mm).
Do wiring step by step. Peel off the coating of wires, and crimp them using the pliers and bond them to the crimp terminal.
Be sure to securely connect the crimp terminals.
*Use crimp terminal & Φ4.0 (CA / CB104) for connection.
4,The main unit is waterproof.
Please pay attention to the installation point to avoid short-circuit at the connection part.
This product is equipped with a built-in protection circuit (PTC thermistor) because it may fail when an overcurrent exceeding the protection circuit flows.
In case of short circuit, the circuit is temporarily shut down.
5. In cases that the current flow shut due to short-circuit, over-current or surge, the circuit will be recovered by cooling the unit for a few seconds.
Identify the cause of the short circuit and improve the problem.
If the cause of the problem is left unattended, it may cause a fire.
6. PTC thermistor interrupts the current by the heat quantity caused by the resistance of the current.
If the protection circuit is activated, remove the electrical components immediately.
If you use it as it is, there is a possibility that the main body will be deformed or dissolved.
Do not install the unit in a place where the temperature of the unit will rise above 80°C due to engine heat.
The current may be cut off and the device may become unusable.
7. Continued use of electrical components without starting the engine may cause the battery to run out.
Please check it for a short time or use it with the engine running.
It is recommended to switch off the electrical components before starting the engine.
8. If you use a booster cable or a quick battery charger when the battery runs out of power or when charging the battery, there is a possibility that the unit will melt or break down.
9. A lot of electrical components using with this product will cause the battery exhaution.
If the battery continues to be discharged in winter, the battery will run out, so please perform daily maintenance and voltage control.
It is recommended to use Kijima's battery checker (304-6261) for voltage control.
In addition, there is a possibility that the lithium-ion battery is insufficiently charged when the voltage drops below a certain level according to the specifications.
10, Please use a tester to check the installation.
11, Be sure to insulate the negative wire with vinyl tape, etc., as it will short-circuit if the wire and the iron part touchs each other.
12, If the main unit shuts down after observing the above, select the electrical components to be used or relocate the electrical components to another location.
13, Always turn off the main key during operation.Do not plug or unplug the wires with the main key in the ON position.
There is a possibility of equipment failure due to a short circuit.
It is dangerous if the vehicle body falls down during operation, so work on a level surface with the vehicle body stable.