Standart bir Gidona monte edilir ve kablo olmadan standart bir gidona bağlanır ve bir "Φ48 Küçük DN Takometre Kiti 12500 RPM" dir.
* Ayrıntılar
Bu ürün, OEM Gidon için Kelepçe Braketi ve OEM parça işleme ve kablolama ihtiyacını ortadan kaldıran araca özel bir alt kablo demeti ile birlikte gelir. (AA06) ve CROSSCUB110 (JA45).
Kablolama, özel alt kablo demeti ve Couplet-on kullanılarak 6V MONKEY / GORILLA Ana Kablo Demetine ServiceCoupler'a bağlanabilir.
Φ48SmallDN (Dijitalİğne) Takometre
İşaretçi açısı, dijital sinyaller ve yüksek işaretçi tutma ve mükemmel güvenilirlik sağlayan Küçük Tip Motor tarafından tamamen kontrol edilir.
MeterBody, RPM işlevine ek olarak ayrıca bir Termometre, Saat, EngineWorkTimer ve Otomatik Ölçüm (maks.. Sıcaklık. kayıt / maks. rpm) ..
Beyaz LED aydınlatmalı siyah panel, gece tanıma için mükemmeldir.
Paslanmaz gövde.
934; 48 Küçük DN Takometre
Elektrikli Takometre: -12,500 rpm
Monitörün çeşitli işlevleri vardır (Dijital gösterge)
Çubuk Sıcaklık Sensörü (150 santigrat dereceye kadar ölçüm yapabilir) Başlığa takılıdır ve Sıcaklık Sensörünü Kaputun içine yerleştirerek dış havanın sıcaklığını ölçmenizi sağlar.
Otomatik ölçüm fonksiyonu
Sayaç takıldığında maksimum sıcaklık ve RPM otomatik olarak kaydedilir.
Sürüşten sonra, sayaç ekranını değiştirerek kaydı kontrol edebilirsiniz ve siz bir sıfırlama gerçekleştirene kadar kayıt kaydedilir.
· EngineWorkTimer
500 rpm'nin üzerinde motor çalışma süresini otomatik olarak ekleyen zamanlayıcı.
500 rpm'nin altına düştüğünde durur.
Maksimum Geniş süre: 9999 saat (100 saate kadar dakika olarak, 100 saatten fazlası ise saat olarak kaydedilir.. )Sıfırlanabilir. Gizli ayarlarla
Hedef mesafe ayar aralığı (10m Birimler)
24 saatlik ekran, ekransız ayar
The "Φ48 Small DN Tachometer Kit 12500RPM" can be installed on the stock handlebar without any wiring modification
■Details
This product comes with a clamp bracket that is compatible with the stock handlebar and a motorcycle specific sub-harness, so you can install the Φ48 Small DN Tachometer 12500RPM on the Cross Cub 50 (AA06) and Cross Cub 110 (JA45) without the need to modify the stock parts or wiring.
The wiring can be connected to the service coupler on the main harness by using the dedicated sub harness.
■Φ48 Small DN (Digital Needle) Tachometer
The angle of the pointer is completely controlled by digital signals and a small motor, resulting in high pointer retention and excellent reliability.
In addition to the RPM function, the meter is equipped with a thermometer, a clock, an engine work timer, and an automatic measurement function (maximum temperature record / maximum RPM record).
The black panel with white LED lighting provides excellent nighttime visibility.
Stainless steel body.
■Φ48 Small DN Tachometer Details
・Electric tachometer with pointer: -12500rpm display
・The monitor is equipped with a variety of functions (digital display)
A thermometer (up to 150 degrees) and a stick temperature sensor are included, so you can measure the outside air temperature by placing the temperature sensor inside the cowl.
・Automatic measurement function
The maximum temperature record and the maximum rpm record are done automatically when the meter is installed.
After running, you can check the record by switching the meter display, and the record will be saved until resetting.
・Engine work timer
Timer that automatically adds up the engine operating time above 500rpm.
It stops when the speed drops below 500rpm.
Maximum time: 9999 hours (up to 100 hours is recorded in minutes, and over 100 hours is recorded in hours.) Resettable.There is a non-display setting
・Clock
24-hour display with hide setting