"48 Küçük DN Takometre Kiti12500RPM" Normal sayacın yanına sığar ve basit bir kablolama değişikliği ile monte edilebilir.
* Ayrıntılar
Bu ürün, OEMSpeedometer'ın yanına yerleştirilebilen bir Metre Braketi ve basit bir kablo modifikasyonu ile kuruluma olanak tanıyan bir Alt kablo ile birlikte gelir ve Φ48 Küçük DN Takometre'nin monte edilmesini mümkün kılar (Beyaz LED) REBEL250'de (MC49). Rebel 250'ye (MC49) ..
Metre Braketi, Malzeme: Siyah Boyalı Çelik
Φ48SmallDN (Dijitalİğne) Takometre
İşaretçi açısı, dijital sinyaller ve yüksek işaretçi tutma ve mükemmel güvenilirlik sağlayan Küçük Tip Motor tarafından tamamen kontrol edilir.
MeterBody, RPM işlevine ek olarak ayrıca bir Termometre, Saat, EngineWorkTimer ve Otomatik Ölçüm (maks.. Sıcaklık. kayıt / maks. rpm) ..
Beyaz LED aydınlatmalı siyah panel, gece tanıma için mükemmeldir.
Paslanmaz gövde.
934; 48 Küçük DN Takometre
Elektrikli Takometre: -12,500 rpm
Monitörün çeşitli işlevleri vardır (Dijital gösterge)
Sopa Sıcaklık Sensörü (150 santigrat dereceye kadar) kite dahildir, böylece isteğe bağlı SP Takekawa tahliye cıvatasıyla tahliye cıvatasındaki sıcaklığı ölçebilirsiniz.
Sıcaklık Sensörünü kaputun içine yerleştirerek dış hava sıcaklığını ölçebilirsiniz.
Otomatik ölçüm fonksiyonu
Sayaç takıldığında maksimum sıcaklık ve RPM otomatik olarak kaydedilir.
Sürüşten sonra, sayaç ekranını değiştirerek kaydı kontrol edebilirsiniz ve siz bir sıfırlama gerçekleştirene kadar kayıt kaydedilir.
· EngineWorkTimer
500 rpm'nin üzerinde motor çalışma süresini otomatik olarak ekleyen zamanlayıcı.
500 rpm'nin altına düştüğünde durur.
Maksimum Geniş süre: 9999 saat (100 saate kadar dakika olarak, 100 saatten fazlası ise saat olarak kaydedilir.. )Sıfırlanabilir. Gizli ayarlarla
Hedef mesafe ayar aralığı (10m Birimler)
24 saatlik ekran, ekransız ayar
The "Φ48 Small DN Tachometer Kit 12500RPM" can be installed next to the stock meter with a simple wiring modification
■Details
This product comes with a meter bracket that can be placed next to the stock speedometer, and a sub-cord that enables installation with simple wiring modification, so you can install the Φ48 Small DN Tachometer (White LED) on your Rebel 250 (MC49).
Meter bracket is made of steel with black painted finish
■Φ48 Small DN (Digital Needle) Tachometer
The angle of the pointer is completely controlled by digital signals and a small motor, resulting in high pointer retention and excellent reliability.
In addition to the RPM function, the meter is equipped with a thermometer, a clock, an engine work timer, and an automatic measurement function (maximum temperature record / maximum RPM record).
The black panel with white LED lighting provides excellent nighttime visibility.
Stainless steel body.
■Φ48 Small DN Tachometer Details
・Electric tachometer with pointer: -12500rpm display
・The monitor is equipped with a variety of functions (digital display)
A thermometer (capable of measuring up to 150°C) and a stick temperature sensor are included, so you can measure the temperature at the drain bolt by purchasing SP Takegawa drain bolts (sold separately).
The temperature sensor can be mounted inside the cowl to measure the outside air temperature.
・Automatic measurement function
The maximum temperature record and the maximum rpm record are done automatically when the meter is installed.
After running, you can check the record by switching the meter display, and the record will be saved until resetting.
・Engine work timer
Timer that automatically adds up the engine operating time above 500rpm.
It stops when the speed drops below 500rpm.
Maximum time: 9999 hours (up to 100 hours is recorded in minutes, and over 100 hours is recorded in hours.) Resettable.There is a non-display setting
・Clock
24-hour display with hide setting