Neden gerekli
"Soğutma verimliliği" ve "koruma performansı" gibi çelişkili temaları nasıl uzlaştırabiliriz ?.
Küçük taşlara ve Çöplere doğru uçan böcekler, Ön lastikten gelen ışık... vb
Bunlar alüminyum kanatlardan yapılmış Radyatör göbeğine hasar verir.
Kanatlar ezildiğinde soğutma etkisi kaybolur ve bazı durumlarda WaterLine hasar görür ve soğutucu sızıntısına neden olma riski vardır...
Dağlama fabrikası tarafından yapılan özellikler
Dağlama fabrikasının Radyatör çekirdek koruması, özellikle yaz ortasındaki 8 saatlik dayanıklılık yol yarışında, Radyatör için en şiddetli olduğu söylenebilecek birçok kez test edilmiştir.
MeshPattern'in yerleşimi, MeshLine kalınlığı ve diyafram, Yarış sahnesinden gelen geri bildirimlerdir.
Her iki TARAFTA ince merkez alan ve kaba HexagonalMeshPattern.
Bu, ön lastikten fırlatılan küçük taşların ve çöpün, lastik genişliğine uyan merkezde ince bir ağ ile korunacağı anlamına gelir.
Her iki SIDE'nin kaba ağı, "soğutma verimliliği" ve "koruma performansı" gibi çelişen temaları dengeleyen bir açıklık oranına sahiptir.
Materyal'i seçmemizin bir nedeni var ..
Alüminyum veya Titanyum durumunda, MeshLine genişliği yalnızca plaka kalınlığının azaltılmasıyla elde edilebilir. (Mukavemet) , ancak Paslanmaz Çelik kullanarak (SUS304 0.8t) , mukavemet azalmadan ideal çizgi genişliği elde edilebilir
Core guard sadece performansı sürdürmek için bir eşya değil, aynı zamanda güzelliği gelişigüzel bir şekilde cezbedecek bir giydirme etkisine de sahip..
Koru ve Büyü.
Büyük Ağrılı Makineniz için güvenle tavsiye ediyoruz !.
■Why is this necessary?
How do we balance the conflicting themes of "cooling efficiency" and "protection performance"?
Pebbles and debris rolled up from the front tires, insects flying at the lights...etc.
These will damage the radiator core which is made up of aluminium fins.
When the fins are crushed, the cooling effect is lost, and in some cases, the water line may be damaged, causing a coolant leak...
■Features made by Etching Factory
The radiator core guard of the etching factory has been tested many times in the 8 hours endurance road race in midsummer, which is the most severe race for the radiator.
The placement of the mesh pattern, the thickness of the mesh lines, and the aperture ratio are all based on feedback from the racing scene.
Fine mesh pattern in the center and coarse mesh pattern on both sides.
This ensures that pebbles and debris spun off from the front tire are guarded by a fine mesh in the center that matches the width of the tire.
The coarse mesh on both sides has been designed with an aperture ratio that takes into account the conflicting themes of "cooling efficiency" and "protection performance".
■There is also a reason for the choice of material.
In the case of aluminum or titanium, the mesh line width can only be achieved by reducing the plate thickness (lowering the strength), but by using stainless steel (SUS304 0.8t), the ideal line width can be achieved without lowering the strength.
Based on the above, the core guard is not only an item to maintain the performance of the vehicle, but also has a dress-up effect to show off the beauty of the vehicle in a casual manner.
To protect, to charm.
It is recommended with confidence for your valuable machine.