[Malzeme] Kromoly çelik (3 katmanlı kaplama)
*Araç uyumlu olsa bile, ön çatallar OEM değilse veya araç özelleştirildiyse sığmaz.
*Üreticinin rahatına göre malın özellik değişikliği olduğu bir durum vardır.
Kurulum hakkında
* Aks mili önemli bir parçadır.
Kurulum, kalifiye bir teknisyen tarafından profesyonel bir mağazada yapılmalıdır.
Milin kafa şekline uygun aletleri kullanın.
Mili sıkmak için yanlış alet kullanırsanız, mil yüzeyindeki kaplama filmi çizilecek ve pas oluşacaktır.
Lütfen kurulumdan önce mil yüzeyine gres veya başka bir yağ sürün.
Milin yüzeyi KOOD'un orijinal 3 katmanlı kaplama filmi ile işlenmiştir, bu nedenle Stok kullanımında şaftın kendisinde paslanma olmaz. Bu, metalin potansiyel farkının neden olduğu tekerlek yataklarından vb. pasın bulaşmasını önlemek içindir.
Sıkma için üreticinin belirttiği torka uyun.
Kurulum için OEM somunu kullanıyorsanız lütfen somunu kontrol edin.
Düşme veya kendiliğinden kilitlenen parçanın aşınması nedeniyle somunun hasar gördüğü tespit edilirse, yeni bir somun kullandığınızdan emin olun.. Bu, milin dişli kısmına zarar gelmesini önlemek içindir.
[Ürün kalitesi]
Ürünlerimizi üretmek ve yönetmek için mümkün olan tüm önlemleri almış olmamıza rağmen, herhangi bir sorun olması durumunda herhangi bir iş yapılmadan önce lütfen bizimle iletişime geçin..
paslanmaya dikkat
KOOD şaftları, 3 katmanlı bir kaplama filmi ile işlenir.
Bu, Stok kaplama filminden daha güçlü bir kaplamadır.
Kullanım koşullarına bağlı olarak bir miktar paslanmalar olabilir ancak kalite açısından herhangi bir problem yoktur.
Pasın ana nedenleri şunlardır:. Dıştan gelen pas kaplama yüzeyine bulaşır
・Kaplanmış filmde hasar
Lütfen garantinin paslanmayı kapsamadığını unutmayın.
Lütfen ürünün kalitesini garanti etmediğimizi unutmayın.
Bu, kaplamanın doğası gereğidir ve genellikle kaplama yapılırken görülür. (KOOD mili ve KOOD somunu vb.) birbirleriyle ağlar veya dişler yağsız olduğunda.
Lütfen takarken vida parçası üzerinde kızak bileşiği gibi korozyon önleyici bir gres kullanın.
[Material] Chromoly steel (3-layer plating finish)
Without plating nut
*There may be changes in product specifications due to the manufacturer's reasons.
*Even if the vehicle is compatible, it will not fit if the front forks are not stock or if the vehicle has been customized.
[About the installation]
*Axle shafts are critical parts.
Installation must be carried out by qualified personnel at a professional shop.
・Please use the appropriate tool for the head shape of the shaft.
If the shaft is tightened with an inappropriate tool, the plating film on the shaft surface will be scratched and rust will be caused.
・Before installation, apply grease or other oil to the shaft surface.
The surface of the shaft is treated with KOOD's original "3-layer plating film", so rust will not occur on the shaft itself under normal use.The purpose is to prevent rust transfer from wheel bearings, etc., which is caused by the potential difference of metals.
・Please observe the tightening torque specified by the manufacturer.
・If the vehicle is installed using the stock nut, please check the nut.
If the nut is damaged by tipping over, etc., or if the self-locking part is worn out, be sure to use a new nut.This is to prevent damage to the shaft threads.
[About Product Quality]
・KOOD has taken all possible measures to manage the production. However, if there is any problem, please contact KOOD before the work.
*In no event will KOOD accept any claims or returns after the installation (such as threading the shaft into the wheel).
・About rust
KOOD shafts are treated with a "3-layer plating film".
It is processed with a stronger film than normal plating film.Rust may occur depending on the usage conditions, but there is no problem with the quality.
・Transferred rust: Rust from the outside gets on the plated surface
・Damage to the plating film... Improper use of tools, flying rocks during riding, falls, etc.
[Caution]
In case of KOOD shafts with plated nuts, damaging the threads during installation often happens.
Due to the nature of plating, this is often seen when the plated parts (e.g. KOOD shaft and KOOD nut) mesh with each other or when the threaded part is greaseless.
Please use an anti-corrosive grease such as sledge compound on the screw part when you install it.