Emme Çapı Çapı Φ22'ye karşılık gelir.
Dışarı sol
Ana Jet # 135 Pilot Jet # 17.5 ile
[Ürün İçeriği]
MIKUNI Flat Φ20-432 Karbüratör Komplesi x 1 adet
Manifold Seti x 1 adet
Manifold gövdesi x 1 adet
Kapak Cıvatası 6 x 20 x 2 adet.
Kapak Cıvatası 8 x 15 x 2 adet.
Manifold Paketleme x 1 adet
Paslanmaz çelik bant (Φ25? 40) x 1 adet
Kauçuk tutucu (MIKUNI F24) x 1 adet
Yüksek Gaz Kelebeği Tutucu Seti x
NOT : Motorun özelliklerine ve sürüş ortamlarına bağlı olarak jet tiplerinin ayarlanması gereklidir.. KITACO Büyük Karbüratör kiti tüm karbüratör üreticisi OEM parçaları benimsemiştir çünkü ayar için OEM ürünleri kullandığınızdan emin olun. Sorun neden olabilir ve OEM'den başka kullanırsa doğru ayar çıkmaz.
* Bu bölüm .222.2 gidon belirtimidir. STD gidonu kurmak imkansız. Montaj için Φ22,2 gidon, R kolu ve tutucu seti, ön çatal seti gerektirir.
* STD hava temizleyicinin kullanılması imkansızdır.
○Intake port diameter Φ22 compatible
○Left-handed (baseball pitcher)
○ Main Jet #135 Pilot Jet #17.5 pre-installed
[Kit Contents]
Mikuni flat Φ20-432 carburetor assembly x 1
Manifold Set x 1
Manifold Body x 1
Cap Bolt 6 x 20 x 2
Cap Bolt 8 x 15 x 2
Manifold Packing x 1
Stainless Steel Band (Φ25-40) x 1
Rubber Holder (Mikuni F24) x 1
High Throttle Holder Set x
Note: It is necessary to set up the jets according to the specification of the engine and the driving environment.The Kitaco Big Carburetor Kit uses the stock kit from the carburetor manufacturer, so please be sure to use the stock kit for setting.If you use other than the stock one, the correct setting will not be obtained and it may cause trouble.
*This part is for Φ22.2 handle.Stock handlebars cannot be installed.Φ22.2 handlebar, R lever and holder set, front fork kit, etc. are required for installation.
*Stock air cleaner cannot be used.