Vücut çizilmesinin önlenmesi Conta gibi birçok ürün olmasına rağmen, Stomp Grip, yorgunluğun azaltılmasının parçaları olarak işlev görmek üzere geliştirilmiş bir RidingSupportGEAR'dır.
STREET'ten Devre'ye, çeşitli durumlarda yüksek destek aldım.
Yapıştırıcılar için güçlü bir 3M yapıştırıcı olan özel Elastomer Malzemesi kullanıyoruz.
Hard Riding sahnesinde bile, Pad'in orijinal Grip gücü yerinden edilmeden korunur.
ABD'DE ÜRETİLMİŞTİR!
Stomp Grip, dünyanın her yerinden çeşitli ülkelere ait En İyi Yarışçı, Üstün Tan Rider.
Japonya'nın Devresi, STREET de Büyük popülerlik aldı.
Stomp Grip'in favorisi tüm dünyada hızla artıyor.
[Stomp Grip nasıl takılır]
1. Uygulama yüzeyini temizleyiniz.
([Renk] Temizle kullanıyorsanız, lütfen Compoundetc ile kir ve su kazıyarak temizledikten sonra çalışın.)
2. Lütfen uygulama yüzeyini yağdan arındırınız.
3. Konumlandırma gerçekleştirin.
4. Lütfen hava girmeyecek şekilde kenardan yapıştırın. Yapıştırma sırasında lütfen destek kağıdını çıkarın.
([Renk] Temizle'yi kullanıyorsanız, lütfen yavaşça yavaşça kenarlarından az miktarda uygulayın, hava girmeden temiz bir şekilde yapışabilirsiniz.)
Stomp Grip'in yapıştırıcısı, yapışkan dayanımı stabil hale gelmeden önce 24 saat gerektirir.
Tam yapışma için 72 saat gereklidir.
Tamamen bağlamadan önce kullanıldığında, soyulabilir veya yanlış hizalanmış olabilir.
While most of the products are just a sticker to prevent scratches on the body, the Stomp Grip is a riding support gear that has evolved into a functional part to reduce fatigue.
From the street to the circuit, it is highly supported in various situations.
Originally developed elastomer material, strong 3M adhesive is used for the adhesive.
The pad keeps its original gripping power without shifting even in hard riding scenes.
MADE IN THE USA!
Stomp Grip is used by top racers and stunt riders all over the world.
It is very popular in the circuit and the street in Japan.
Stomp Grip users are increasing all over the world.
[stomping on stomp grips]
1. Clean the surface to be applied.
(When using clear, please remove dirt and water stains with compound before starting work)
2. Degrease the surface to be applied.
3. Perform positioning.
4. Apply from the edge so that air does not enter.Peel off the backing paper while pasting.
(If you use a clear sheet, apply it slowly and carefully, taking your time from the edge.It is possible to stick it beautifully without air entering.)
The adhesive of Stomp Grip needs 24 hours to stabilize the adhesive strength.
Full adhesion requires 72 hours.
If you use the product before it is fully bonded, it may peel off or shift.