908.4 TRY
(4,255 yen)
868.9 TRY
(4,070 yen)
(4,% KAPALI)
5 (4 Tüm yorumlar)
4.8
/
5
4
gözden geçirmek
Excellent
If it's a little cheaper:・・・・My GROM with more heat since I replaced it with a NEOHead.
Takekawa:I installed KITACO:New superOil coolerKit 5-stage CoreCondenser in the Compact cool because I could not control the heat quantity increased by the head replacement.
However, in order to avoid hydraulic clutch and overcooling, Takekawa:Special clutch cover Spec. To get the best of Special clutch cover and KITACO:New superOil cooler, you can install Oil cooler repairParts Mukawa:Banjo set (30 degrees).
Before the installation, I was anxious whether the length of the oil hose attached to the New superOil cooler kit was enough, so I purchased the oil hose (1M) of Repair Parts separately. As a result, the length of the oil hose attached to the New superOil cooler Kit was enough for about 5cm extra.
When the head temperature reaches around 105 degrees, the engine heat content makes the hot oil flow to the oil cooler core. Oil cooler core inlet and outlet become hotter and hotter, and the oil that passes through the oil cooler core goes through the oil hose and comes back to the engine. Check this operation to see if there is no oil leak etc. Check.
By making the inner diameter larger than the Compact cool oil line, the flow rate into the oil cooler core increased and the load on the oil pump could be reduced. It cost us a lot of money to adopt the good points of both companies, Takekawa and KITACO. However, the cost effectiveness was good, and the result was Yes! and
Reviews For SP TAKEGAWA Banjo Seti (Kauçuk Hortum / 30 °) From Other Webike User
Excellent
To change the angleTakekawa's dry method (Hydro) DAYTONA's Clutch from (Hydro) The angle of the release was changed with the change to the 17RHydroClutch, so the angle was adjusted with Mukawa's Fitting. The 17RHydroClutch from Mukawa is the same as the Slim line, so this fits.View Detail
Excellent
Also in Universal ProductI purchased this clutch cover to install an oil cooler on a Special clutch cover.
I thought about using a universal product, but since the oil cooler is also made by Takegawa, I decided to use this product to unify the two.
The degree of curvature is moderate and I am satisfied with both the quality and fitting.
Although it is slightly more expensive, I am satisfied with the fact that it is made by Mukawa.
However, it would be better if other colors were available.View Detail
Very Good
Also in Universal ProductInstalled on TakegawaSpecial clutch cover for APE.
I thought about using a universal product, but since I had prepared an oil cooler made by Takegawa, I decided to purchase the product in question anyway.
Naturally, there were no problems with quality or fitting, and the installation process was smooth.
However, I have heard Small ear that color fading occurs after long-term use, so I am concerned about that.
It would be better if other colors could be selected if possible.View Detail
Most Viewed Reviews Of SP TAKEGAWA Banjo Fittings
Excellent
Nice quality red anodizing not pink like some other brandsNice quality red anodizing from Special Parts Takegawa not pink like some other brands. Light weight aluminium banjo bolt beautifully machined and finished to give my Honda Monkey 125 motorcycle that high end finish I am looking for. Pricing maybe slightly higher then a few other brands available here on Webike but like they always say, you get what you pay for. When working with anodized bolts like this I like to use single hex sockets to minimise the chance of damaging the coating and keep them looking as new after installed on my motorcycle.View Detail
Excellent
To change the angleTakekawa's dry method (Hydro) DAYTONA's Clutch from (Hydro) The angle of the release was changed with the change to the 17RHydroClutch, so the angle was adjusted with Mukawa's Fitting. The 17RHydroClutch from Mukawa is the same as the Slim line, so this fits.View Detail
Excellent
Also in Universal ProductI purchased this clutch cover to install an oil cooler on a Special clutch cover.
I thought about using a universal product, but since the oil cooler is also made by Takegawa, I decided to use this product to unify the two.
The degree of curvature is moderate and I am satisfied with both the quality and fitting.
Although it is slightly more expensive, I am satisfied with the fact that it is made by Mukawa.
However, it would be better if other colors were available.View Detail
Very Good
Also in Universal ProductInstalled on TakegawaSpecial clutch cover for APE.
I thought about using a universal product, but since I had prepared an oil cooler made by Takegawa, I decided to purchase the product in question anyway.
Naturally, there were no problems with quality or fitting, and the installation process was smooth.
However, I have heard Small ear that color fading occurs after long-term use, so I am concerned about that.
It would be better if other colors could be selected if possible.View Detail
Average
It's angled.It's not Straight Type. It is angled. It seems to be able to be used when you want to change the handling.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING