512.37 TRY
(2,400 yen)
474.59 TRY
(2,223 yen)
(7,% KAPALI)
4 (17 Tüm yorumlar)
4.1
/
5
16
gözden geçirmek
Very Good
Easy to useI attached it to Handlebar, but it is very useful.
Midsummer is very convenient to use 900ML plastic bottle and so on.
Since you can adjust the size, you can also use Small Plastic bottle.
Although it is only in summer, a lot of water drops fall from the plastic bottle just bought.
It can not be helped, but it is necessary to take measures on your own. Well, it is not Objection, so if you are concerned, it might be better to take measures such as wrapping the cloth around the bottom of the plastic bottle.
Incidentally Quantity : 2pc. I am using a Set.
Reviews For TANAX İçecek Tutucu MF-4633 From Other Webike User
Excellent
Good cupholdert's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, tooView Detail
Excellent
최고의 컵홀더10여년간 오토바이를 타면서, 사고 팔고 여러번 했지만 항상 필수로 장착한 컵홀더 아이템 입니다.가볍고 튼튼하며 디자인적으로도 우수합니다.한국에서 판매하는 대부분 컵홀더의 원조가 타낙스입니다.사진은 Ct125에 장착해 보았습니다.View Detail
Excellent
For CoffeeTime during warm-upI bought this to take a break with a can of coffee while warming up for work.
Sports motorcycles don't have a lot of space for this kind of thing, so I had to worry about not interfering with the handlebar when cutting it through the mount bar.
with Adjusting Function, but it is almost fixed because it is only for the can Coffee.
After this I also installed Smartphone Holder, but when I make too much wacha wacha, it becomes inconvenient to Access to Key cylinder.
You need to reconsider Coco.View Detail
Terrible
No recommendationInstallation is very easy In the review of other people, there were many opinions that the adjustment Screw is easy to take off, so the Screw Use lock. after 2 hours of drying and 500ml of drink, the screw comes loose after about 2km I did
After 70km, I checked and found the adjustment screw was gone You have a crack in you and the screw part was missing The road I drove on is paved I'm wondering if they check the strength of the product before selling it
No recommendationView Detail
Average
Note the Bracket's Length.I installed it in the GSR 250. It is an impulse using about 3 months.
【attachment】
Just temporarily assemble this product, remove Mirror and install. It finished in five minutes of things.
[Design]
The design that makes a difference with other Drink holders can be likable. The gap due to Square Type is actually exquisite, it is very handy when you want to put a little Gloves.
【Anxious point】
- Bolt under the Holder is anyway concerned. It has already dropped twice. There was no way I could tighten it for the first time because I was not tightening tightly, but it was a dropout after tightening the second time. Since it becomes Stress, it is increasingly tightened with Bolt in Wrench, even though it is for canned coffee. Was there any other way than bolt tightening?
- About the title Bracket, my GSR 250 can not attach this product to Handlebar. So we have to use Bracket to attach to Mirror, but that Bracket is long. Anyway long. Holder 's jump out is amazing. I do not mind, but those who purchase it is better to consider the length of Bracket.
【at the end】
I think that price and design are well integrated, attractive products. However, since there are still many improvement points, we have decided that three stars can not be Recommendation.
As many others point out, Manufacturer thinks Holder's fixing method should be reconsidered.View Detail
Most Viewed Reviews Of TANAX Drink Holder
Excellent
Good cupholdert's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, tooView Detail
Excellent
최고의 컵홀더10여년간 오토바이를 타면서, 사고 팔고 여러번 했지만 항상 필수로 장착한 컵홀더 아이템 입니다.가볍고 튼튼하며 디자인적으로도 우수합니다.한국에서 판매하는 대부분 컵홀더의 원조가 타낙스입니다.사진은 Ct125에 장착해 보았습니다.View Detail
Excellent
For CoffeeTime during warm-upI bought this to take a break with a can of coffee while warming up for work.
Sports motorcycles don't have a lot of space for this kind of thing, so I had to worry about not interfering with the handlebar when cutting it through the mount bar.
with Adjusting Function, but it is almost fixed because it is only for the can Coffee.
After this I also installed Smartphone Holder, but when I make too much wacha wacha, it becomes inconvenient to Access to Key cylinder.
You need to reconsider Coco.View Detail
Terrible
No recommendationInstallation is very easy In the review of other people, there were many opinions that the adjustment Screw is easy to take off, so the Screw Use lock. after 2 hours of drying and 500ml of drink, the screw comes loose after about 2km I did
After 70km, I checked and found the adjustment screw was gone You have a crack in you and the screw part was missing The road I drove on is paved I'm wondering if they check the strength of the product before selling it
No recommendationView Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING