由于之前在别处购买的橡胶垫太厚，安装在油壶上不合适，所以我购买了这款橡胶垫，它相比来说比较薄一些。安装在布雷博的大油壶上刚好适，在搭配galespeed油壶支架使用，有一点的是金属垫片有点厚，在拧螺栓的时候不能完全拧到位。
View Detail
- Instock
149.32 TRY (550 yen)
Webike Point: +6 pt
(1.62 TRY)
Teslimat Bilgisi
In Stock : 5 left, Ships within 24 hours.
Estimated arrival date around
Ürün açıklaması aşağıda Google tarafından otomatik olarak tercüme edilmiştir.
Ürün ayrıntısı
M6 Bolt için
[Dahil Parçalar] Spacer / Yıkayıcı ile
[Adet] 2 adet 1 set.
[Boyut]
Yıkayıcı / İç : 6mm x Dış : 20mm x Yükseklik : 1.6mm
Spacer / İç : 6mm x Dış : 7.8mm x Yükseklik : 8mm
Egzoz Sisteminin ve Hızölçerin titreşim önleme tedbirlerine ne dersiniz?
Dikkat
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Musteri degerlendirmeleri
Reviews with image
Oct 28, 2021
This was used when the H2OEMReserve tank was installed.
CinderellaFit. It is Bolt On with no processing.
It comes with two pieces so you can use the other one as a spare, if you buy the OEM one it will cost you about 1,000 yen for the Rubber and the color. The appearance is almost the same. You can get it here without hesitation. I didn't like the Silver Washer that came with it, so I changed the Washer.
Helpful?
Dec 9, 2018
It's better to have it where vibration is a concern
brembo [Color] When the specs were changed to Smoke's Reserve Tank, the mounting holes are large There are no bolts that will fit as is It seems to assume Rubber
So I bought the same product that fits the hole diameter
I think it's good because it fits well and absorbs vibration well
However, you will need to periodically retighten the Bolt as it is tightened through the Rubber
Helpful?
Apr 4, 2016
Reservoir for Ninja H2 Tank used for diversion
I bought Nisshin Rapon for installing Ninja H2's reservoir tank.
【What made you decide the purchase?】
I saw an article diverting Ninja H2's reservoir Tank to Nisshin's Master cylinder in a certain blog, so I bought this product according to that blog.
【How was it actually used?】
Because it has Rubber in between, it is hard to be affected by vibration, and fixing is also done with chitin so you can run with confidence.
【Mounting was difficult?】
I pulled out the Gold Genus Color which is attached to the Rubber and fixed it to the reservoir Tank.
In my case I wore it with bare hands, but if I feel stiff, Slotted screwdriveretc. Please push it with the tool of.
【Please tell me the installation point and hang】
When inserting the Rubber using the tool, I think that it is good to curing and not to hurt the Parts and the car body wearing the Rubber or to adjust the power.
[Is there anything I was disappointed about?]
None
【Hope for Manufacturer - Please let me know if you have any improvement points]
Quantity : 1 Set of 2pcs. It is sold at, but this time I used 1pc. It was only.
Because it becomes expensive if set, 1pc. I thought it would be saved if I sold it with Single Item.
【Have you compared items?】
None
[Others]
In my case I used it to fix reservoir tank, for example Cowletc. It is also possible to use the H Type Rubber for protection of Wiring even when opening a hole in Wiring.
1pc. I thought it would be better if the selling price or price was a little cheaper.
Helpful?
Feb 22, 2016
I used it to divert Kawasaki H2's Reserver tank. It matches Exactly to the hole diameter of Reserver tank. OEM Parts Number Although it is OK to purchase, I think that it would be better to use this if you have trouble..
View Detail
Helpful?
New Custom Articles
