Since I am mainly on road, I was concerned that the Foldable OEM might get stuck and move, so I replaced it with this Fixed Type one.
The footpeg position is raised, so it can be recommended for those with poor footing as it makes it a little easier.
Licking the head of the OEMfootpegBolt is a terrible idea, so you'd better loosen it with a solid tool!
- Instock
5,375.62 TRY (19,800 yen)
Webike Point: +198 pt
(53.75 TRY)
Teslimat Bilgisi
In Stock : 1 left, Ships within 24 hours.
Estimated arrival date around
Ürün açıklaması aşağıda Google tarafından otomatik olarak tercüme edilmiştir.
Ürün ayrıntısı
Malzeme : Dövme Duralumin
*
.
.
3-konumu
Geri (Mm) / Yukarı (Mm) : Standart konum / 5 (Mm) : Standart konum / 18 (Mm) Standart pozisyon / 31 (Mm)
YAMAHA Tüm vücudun yüksek performansından daha fazla yararlanmak için daha agresif bir pozisyon edin!
? Footpeg pozisyonu, fiziğe ve kullanım amacına göre 3 adımda ayarlanabilir.
? Pedal Miktarı: Çifti (Sol ve Sağ için) Birlikte, OEM'i olduğu gibi kullanın.
? Plaka, Footpeg, Sadece montaj parçalarının sayısı: Set, Uygun fiyat.
- Duralumin dövme olarak Footpeg dövme yaparak, MaterialLevel'de herhangi bir şansla kazayla hasarı azaltır. Parçaların takibi Bolt setinden tamamdır.
Dikkat
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Musteri degerlendirmeleri
Reviews with image
Fits:YAMAHA WR250X 08
Mar 30, 2022
Helpful?
Fits:YAMAHA WR250X 08
Apr 2, 2021
These things look dope. I'm excited to install them. They have a nice aftermarket look without being too flashy. These must be rare, because I have never seen them on any other bike.
View Detail
Helpful?
Fits:YAMAHA WR250X 08
Feb 4, 2013
Although the spatial relationship of the Step and Brake pedal as for which a guide peg becomes hanging is improvable by Tilt Up in a normal valve position by the Racing step which is not one of a few Off vehicles,Normal-pedal use is an adverse effect because of a Reduction in cost. -- The part Brake Shift pedal out of which a Step comes outside has the bad charge of a guide peg.He changes into an attached color, an independent Washer, and a short Bolt, and it is bringing him near by the Body to the Limit.In addition, the Support portion of an ankle is small, a position is too low, and there is almost no meaning.Although a MOTARD vehicle is made On slippage with much trouble at a Race ish, I want you to do my best in a Design and a function to a slight degree.
View DetailHelpful?
Fits:HONDA FTR223 -08
Installed on: HONDA CB223S
Jan 10, 2025
weight saving and same foot position + 2 other position options
Nice finishing and helps to save ~400gram from the stock footpeg. Also allow you to have 3 foot position options. I use the stock position.
View DetailHelpful?
Fits:HONDA FTR223 -08
Jul 25, 2022
I was not happy with the squishiness of the OEM footpeg, so I removed the footpeg rubber, but I felt uncomfortable with the position, so I bought this product which has a good product review.
First of all, the removal of the OEM footpeg requires the use of a socket wrench because there are some places where a Glasses Wrench will not fit.
Since Screw lock agent is applied to the bolt, beginners need to be careful not to nudge it.
The Left Shift side doesn't translate, but the problem is the Right SideBrake pedal side.
I removed the adjustment Nut on the Brake pedal to allow the Pedal to move Free to create Space for the tool.
Installation can be done easily by reading the included instruction manual, but considering the vibration of the single cylinder engine and the fact that the OEM footpeg screw lock agent was applied, we recommend the application of a medium-strength screw lock agent from GACHI Screwetc.
As for Position, I was impressed with how different it was when I test drove it. I was impressed. No problem in terms of strength.
I think it is a good product with good machining accuracy for the price.
Helpful?
New Custom Articles
