I use this carb on my bike 125cc. I.was very happy. Recently i have an issue. When i start my bike i try to throttle a little and my bike the carb, is choking. I can not accelarate smoothly. Only when the engine is hot enought the carb runs better. And also i cannot find needle set pilot jet and the smaller jet in the site to change it. The fuel mixing and air i try to adjust it but it didnt help much. Any suggestions will be very usefull cause i dont want to change the carb cause is to expensive. Also if u have needle set for the specific carb please let me know. Thanks.
View Detail
8,353.55 ~ TRY (30,800 yen)
Webike Point: +308~ pt
(83.53 TRY)
Teslimat Bilgisi
-
Please select product form first.
Ürün açıklaması aşağıda Google tarafından otomatik olarak tercüme edilmiştir.
Ürün ayrıntısı
Çap : Φ24
Karbüratör Pitch : Tek vücut
[Ayrı Parçalar]
TM-MJN için Manifold KIT / CR-mini MJN22
[Ayrı olarak Önerilen Parçalar]
Büyük Ayar Vidası
ÇİFT STACK FUNNEL SİSTEM SETİ
YOSHIMURA Orijinal Alüminyum Huni L = 30mm
K & N Hava Filtresi
Gaz Kelebeği Takımı
Üniversal yağ tankı seti
** Kurulum için gerekli diğer parçalar var.
* Bu ürün yarış içindir..
TM-MJN24, Hafif ayardan Yüksek ayar için YÜKSEK bir karbüratördür.. YOSHIMURA kendi "MJN" (MultiPullJetNozzle) "Kabul edildi, yüksek performans ve yüksek yanma verimi elde etti. "MJN (MultiPullJetNozzle) "Genellikle yakıtın parçacıklarının en büyük genişlikli çıktısını elde eden Jet iğne tipi, YOSHIMURA kendi makinesine kıyasla küçük bir ince ve düzgünsüzlük için yanma verimliliğini mümkün kılmaktır.
Parça listesi
Dikkat
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Musteri degerlendirmeleri
Reviews with image
Fits:HONDA MONKEY
Installed on: HONDA MSX125 (GROM)
Fits:HONDA MONKEY
Installed on: HONDA DAX70 (ST70)
Jul 23, 2023
La verda que todo está muy bien y muy rápido el envío muy buen material y muy completo grandes vendedores muchas gracias por todo
View DetailHelpful?
Fits:HONDA MONKEY
Installed on: HONDA APE100
Nov 27, 2022
YOSHIMURA Mikuni TM-MJN24 Carburetor
About quality and texture There were some stains on the vaporizer, but it was so beautiful that it didn't matter.About the feeling of use There is no need for doubtProducts to buy together Yoshimura 771-000-1900 Large Adjustment Screw Set , Yoshimura Aluminum Funnel , High Throttle Set,Difficulty of installation easyCost performance and comparison with other products The response is faster than the Keihin productAbout shipping and packaging It took a week and the packaging is greatAny concerns, cautions, or advice when purchasing Because it is compatible with mjn26, I decided to use mjn26 parts If you buy a single body and components, you can show satisfactory performance even though it's expensive
View Detail
Helpful?
Fits:HONDA MONKEY
Nov 21, 2021
When using it on the KSR110, nothing is wrong except in winter.
I used it on the KSR110
I think it's a good large size carburetor for KSR110, the setting comes out rather quickly, and it can run happily in spring, summer and autumn without any problem.
However, in the winter, since the Carburetor Heater can't be installed, it may not be able to vaporize the gasoline properly due to the cold weather.
I think I could probably get away with thickening the Gasoline or attaching the HeaterPanel to the carburetorBody, but I don't think I'd go that far.
Helpful?
Fits:HONDA MONKEY
Jul 24, 2016
Product distinction unknown solution
Although it was already used, it is already attached, but when you replace PJ, crush Screw and buy the same thing.
http : / / shop. yoshimura-jp. com / syouhin / syousai. php?id=15207 (YOSHIMURA Site)
So,? Recommended Engine : 88 cc or more (STDHead not supported) ,? - Recommended Engine : Yoshimura headKIT,? - Recommended Engine : Other company Head 124cc
There are three kinds, and we ordered after contacting Manufacturer as to which one of us belongs.
But,
Manufacturer's answer was wrong
Therefore, things that will not be used arrive, Objection to Manufacturer.
The difference between the three is that only MJN, we sent the arriving goods to Manufacturer, exchanged MJN, and sent it back.
- Because it is a product of our company, you should make an accurate answer.
- Because it is a mistake on the Manufacturer side, why should User bear the shipping fee from us?
I am angry even remembering it now.
Helpful?
New Custom Articles
