I bought this product because my XR250MOTARD was leaking gas from the joint gasket and it was bothering my neighbors. the KITACO product was cheaper, but I wanted to stop the leaking completely and it was highly rated, so I bought this one.
As an advise, you can apply grease to both the inside and outside of the joint gasket with a cheap oil-based product. This will make installation easier, increase efficiency, protect the gasket, and also seal the gasket against gas leaks as the grease will burn off with heat after installation.
The most common mistake is to modify or cut the gasket because it is difficult to fit. It depends on the material.
If you have a Slip-on Silencer, you can use a pliers tool to widen the Silencer side so that the joint gasket can fit. If it is a Slip-on Silencer, you can use Pliers etc. on the Silencer side to widen the joint gasket to fit.
Most of the time, the gasket doesn't fit well on the external silencer side, so the gasket is damaged by forcing it to fit.
The Gas leak stopped completely and I was very happy with Large.
257.92 TRY (950 yen) 268.78 TRY kaydet 4%
Teslimat Bilgisi
This item is discontinued.
Teçhizat
-
XR400 Motard
05-08
-
XR250MOTARD
95-07
-
XR250 BAJA
95-07
-
XR250
95-07
Ürün ayrıntısı
** Aşağıdaki model numarası parçaya göre farklıdır.
CRF250R 2014-17
D31-41-010
CRF450R 2013-16
D31-41-020 (Ön taraf)
D31-41-030 (Arka taraf)
YZ450F 2010-13
D31-41-630 (Ön taraf)
D31-41-640 (Arka taraf)
YZ450F 2014-17
YZ450FX 2016-17
WR450F 2016
D31-41-610 (Ön taraf).
* Resmi yalnızca referans içindir. Resimdeki üründen farklı olabilir.
Egzoz Sistemi Eklemlerde egzoz sızıntısını önlemek için yedek conta.
JAPONYA MODELİ 'nin Off - roadfor aracı için bolca.
Deltaetc'in dış egzoz sistemine değişim yaparken kullanışlıdır.
Dikkat
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Musteri degerlendirmeleri
Reviews with image
Fits:HONDA XR400 Motard 05-08, HONDA XR250 BAJA 95-07, HONDA XR250MOTARD 95-07, HONDA XR250 95-07
Jan 20, 2022
Fits:HONDA XR400 Motard 05-08, HONDA XR250 BAJA 95-07, HONDA XR250MOTARD 95-07, HONDA XR250 95-07
Oct 9, 2012
Simultaneous purchase was carried out with the Barrel 4s Muffler.Since he would like to also change the
Exhaust pipe, it purchases, and I think that it was good.
Fits:HONDA XR400 Motard 05-08, HONDA XR250 BAJA 95-07, HONDA XR250MOTARD 95-07, HONDA XR250 95-07
Jul 2, 2012
although it had clung by 1st Pipe purchase by Silencer purchase in the form which became brave although it was the 2nd time so that
2 time did not have the necessity for purchase --
-- it is relief safe -- it attached by things.The place into which there is also no
gas leak and it gets exactly is good.
Fits:YAMAHA YZ450F 17-21 (R), HONDA CRF250 RALLY 17-20, YAMAHA WR250X 07-17, YAMAHA WR250R 07-17, HONDA CRF250 RALLY 17-20
Apr 2, 2021
Thank you, WEBIKE! I didn't think I would ever find the right part. This exhaust joint gasket fits the Delta Barrel 4 Exhaust. I didn't have a caliper to measure the exact fit of the exhaust joint and they smash after use. So I didn't know the actual size I needed. It was proving quite difficult. My exhaust wouldn't fit without it. I now have it am I'm very pleased with the product. Thanks again, WEBIKE.
View Detail
Fits:KAWASAKI D Tracker 125 10-16, KAWASAKI KLX125 10-16, KAWASAKI KLX150 09-13 S
Nov 13, 2020
I bought it again because it was new and somehow it got into the back of the MiddlePipe.
I've bought JMCA Certified for places where I can't run without changing the exhaust system many times, but the quality is usually fine.
New Custom Articles
